View Full Version : Steamers - How do you use it?
Nick McKees37
07-22-2011, 01:47 PM
For those of you that utilize some type of steamer with your detailing work, what do you use it for the most?
Please be specific! :props:
VIP Reflections
07-22-2011, 01:54 PM
For me its a go to tool when i detail engines but i use it mostly on soiled carpets/matts and fabric seats
Darn Yankee
07-22-2011, 02:09 PM
Have used it under the hood where it latches and the springs (they had oil and grease on them and I want to re-lubricate them). Used on door jambs, soiled seats, and floors on interior. Used under and around Front Grill area.
That is all I can think of that I used steam on. May have used in other areas but it is to hot to think any harder, my brain will start sweating, LOL:dblthumb2:
Jim
ShineTimeDetail
07-22-2011, 02:25 PM
Windows baby!!! Carpets, seats, leather, headliners, door panels, rubber stripping, tar on rocker panels, wheels sometimes, engines, wax on trim, door jams, jeez I could use it on everything!!
VX5000 turned up to 5.5 bars.
C. Charles Hahn
07-22-2011, 02:28 PM
I can only pick one option in the poll? Not fair!
Let's see...
Interior:
* Stained carpets/mats/seats
* Cleaning consoles and cupholders
* Extremely dirty glass
* Air vents and dash seams
Door Jambs
Engines (never around electrical connectors/wiring)
Cleaning old wax/polish from panel gaps/etc.
There are all kinds of cool things you can do with steam!
Porsche Pilot
07-22-2011, 02:29 PM
It rocks on windows. Door jambs, sills, carpets, vents, engines...use on everything pretty much except the client.
Rei86
07-22-2011, 02:34 PM
Since this poll is on top of every thread I use I voted for other - because I don't own one.
C. Charles Hahn
07-22-2011, 02:38 PM
It rocks on windows. Door jambs, sills, carpets, vents, engines...use on everything pretty much except the client.
:laughing:
Unless the client happens to be a lobster.... :hungry:
TS656577
07-22-2011, 02:48 PM
I use mine on a lot of interior stuff; carpets, seats, door panels, etc and also in door jambs. i love steam
ShineTimeDetail
07-22-2011, 02:54 PM
It rocks I use it on everything pretty much even the client.
:iagree:
AeroCleanse
07-22-2011, 06:20 PM
What haven't I used it for
dad07
07-22-2011, 06:34 PM
The poll is biased with only one choice!
I use my steamer for EVERYTHING I can think of!
Robert8194
07-22-2011, 09:21 PM
Engine, carpet and floor mats, cloth seats, glass. Use the VX 5000 turned up to 6 bars. Steam is great.
T.O.C.
07-22-2011, 10:15 PM
Windows baby!!! Carpets, seats, leather, headliners, door panels, rubber stripping, tar on rocker panels, wheels sometimes, engines, wax on trim, door jams, jeez I could use it on everything!!
VX5000 turned up to 5.5 bars.
I'm with ya' there. I use the steamer anywhere and every where. mostly used on wheels and door jams and engines. but have used it on almost every surface in and on a vehicle.
1MZsLastForever
07-22-2011, 10:50 PM
Interior: Literally everything
Engine bay, underside of the hood.
Exterior: Touch up any missed spots on rims, gas caps, blasting away dried up residue from emblems, etc.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.