PDA

View Full Version : Megs DA Microfiber


Jenn1270
07-17-2011, 07:01 PM
While ONRing the Pilot (http://www.autogeekonline.net/forum/show-n-shine/27060-2006-honda-pilot-wash-wax.html, (old post to see the color) I realized how neglected it was and is swirled out.

I have the DA MF kit on the way and should be arriving tomorrow.

Are there any tricks I should know before I start? I watched the megs video to get the basics.

I will try and get some pics but my camera (only phone, lost the camera in the move) isn't so great.

Jenn
silverfox
07-17-2011, 07:55 PM
Keep pads clean between panels, keep speed down to recommended settings, spritz water on panel occasionally, and dont overload the disc with product after initial priming.
Marc08EX
07-17-2011, 08:11 PM
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?
tapp1
07-17-2011, 08:16 PM
Anyone know what dial numbers these translate to for the Megs G100 DA?
mark58
07-17-2011, 08:36 PM
Anyone know what dial numbers these translate to for the Megs G100 DA?


Speed Setting 1 - 1800 opm
Speed Setting 2 - 2800 opm
Speed Setting 3 - 3800 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm
Jenn1270
07-17-2011, 08:47 PM
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?

PC XP

Does anyone know what dial numbers translate to for the opm?
mark58
07-17-2011, 08:55 PM
PC XP

Does anyone know what dial numbers translate to for the opm?OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm

I think!

http://www.autogeekonline.net/forum/questions-about-porter-cable-7424xp-7424-7336-griot-s-meguiar-s-dual-action-polishers/33434-opm-chart-pc-7424xp.html
Marc08EX
07-17-2011, 08:55 PM
Anyone know what dial numbers these translate to for the Megs G100 DA?

G100:
Speed Setting 1 - 2300 opm
Speed Setting 2 - 2350 opm
Speed Setting 3 - 2600 opm
Speed Setting 4 - 3280 opm
Speed Setting 5 - 4780 opm
Speed Setting 6 - 6100 opm

So you can use speed 5 for the D300 compound and around speed 4.5 for the D301 finishing wax.
Marc08EX
07-17-2011, 08:58 PM
PC XP

Does anyone know what dial numbers translate to for the opm?


OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm

I think!

http://www.autogeekonline.net/forum/questions-about-porter-cable-7424xp-7424-7336-griot-s-meguiar-s-dual-action-polishers/33434-opm-chart-pc-7424xp.html

Thanks correct Mark!

So speed 4 for D300 and speed 3 approx for the D301. Same speed dial settings as the g110v2.
Jenn1270
07-17-2011, 09:10 PM
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?


OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm

I think!

http://www.autogeekonline.net/forum/questions-about-porter-cable-7424xp-7424-7336-griot-s-meguiar-s-dual-action-polishers/33434-opm-chart-pc-7424xp.html

Thanks Marc

Jenn