PDA

View Full Version : Switching to Menzerna...


ObsessiveAutoDetail
07-15-2011, 05:38 PM
This is in NO way a hit on Meguiars 105/205. Been using it for a while now. And while it produces phenomenal results with a DA polisher, it's working time with a rotary leaves something to be desired. Which Menzerna polishes should I look in to to replace the 105/205 combo when I'm using my rotary?

Thanks!
BobbyG
07-15-2011, 05:45 PM
If I had to recommend 3 polishes from the Menzerna line it would be the bundle below.

This is a killer trio that will cure just about anything thrown at them.

Menzerna Power Gloss, Power Finish & Super Finish Bundle, Menzerna Polishes Combo, Nano Polish, Power Finish Polish, Power Gloss Compound (http://www.autogeek.net/menzerna-polish-bundle3.html)


This is how they compare from a cut and gloss perspective.


http://i153.photobucket.com/albums/s225/BobbyG53/Detailing/MenzernaProducts-1.jpg
ObsessiveAutoDetail
07-15-2011, 05:51 PM
That's what I was leaning towards as well... Just wanted some input. Thanks!
jamesn184
07-15-2011, 07:04 PM
Id go with Fast Gloss, it's a step above powergloss and finishes down very nice.. I've used it a few times with my da and its almost get away with a 2step..
porta
07-16-2011, 03:54 AM
Id go with Fast Gloss, it's a step above powergloss and finishes down very nice.. I've used it a few times with my da and its almost get away with a 2step..

Fast Gloss (S500) is not available in the states due to the high VOC.

And yes, S500 is a killer and pair it with PO203s and PO106FA and you have a winning team.
AeroCleanse
07-16-2011, 11:44 AM
I have a few Menz polishes, never needed Powergloss. I use SIP and 85RD.
LegacyGT
07-16-2011, 11:53 AM
SIP, nano(PO106FA) and PO85RD are awesome polishes. I also keep power finish around for one step.
budinsc
07-16-2011, 12:10 PM
This is in NO way a hit on Meguiars 105/205. Been using it for a while now. And while it produces phenomenal results with a DA polisher, it's working time with a rotary leaves something to be desired. Which Menzerna polishes should I look in to to replace the 105/205 combo when I'm using my rotary?

Thanks!
i have switched to menzerna super intensive polish and found it cuts much better than megs 105 with a pcxp, especially on hard clear coats. i took the advice that bobby gave you.
ScottB
07-16-2011, 04:51 PM
I still find the ceramiclear polishes from Menzerna all that !
LegacyGT
07-16-2011, 11:24 PM
I still find the ceramiclear polishes from Menzerna all that !

:iagree:
jpegs13
07-17-2011, 04:33 AM
I'm a huge Menz fan. Never a bad experience. You'll love 'em!