Megs MFDA and Menz Powerlock

[IOMCAMARO]

This weekend I plan to use the Meg's MF DA to correct the paint on my Camaro. It needs it bad because it has never been properly corrected. I was wandering after I use D300/D301 if it would be okay to use Menz Powerlock on top? Or should I strip the wax left my the D301 with a Dawn wash then put Menz Powerlock down?

[Marc08EX]

You should be fine. People have applied sealants/waxes on top of D301 without any problems.

[IOMCAMARO]

You should be fine. People have applied sealants/waxes on top of D301 without any problems.

Should I wait 12-24 hours to let the D301 cure?

[embolism]

Is it ideal to top D301 (essentially an AIO) with a sealant? Probably not, but as the articles on here say, people have yet to come back to their car and find that their sealant has fallen off the car.

Many ppl substitute M205 for the D301 then seal after a wipedown. Have you looked at the Griots pre wax cleaner? Might save you from having to strip/wash and dry the car if you want the finishing properties of the D301 but don't want the wax it leaves behind...

[IOMCAMARO]

Is it ideal to top D301 (essentially an AIO) with a sealant? Probably not, but as the articles on here say, people have yet to come back to their car and find that their sealant has fallen off the car.

Many ppl substitute M205 for the D301 then seal after a wipedown. Have you looked at the Griots pre wax cleaner? Might save you from having to strip/wash and dry the car if you want the finishing properties of the D301 but don't want the wax it leaves behind...

I might have to look into this. I have a Griot's store local to me. :props: