View Full Version : Rejex
corvette c6
06-25-2011, 01:59 PM
Hi can i add a coat of soveran on rejex .
THANKS
Rayaz
06-25-2011, 02:27 PM
Never heard of Rejex so I looked it up. It looks like it would work to me. Souveran is a sacraficial shine coat with no cleaning ability so it should not hurt a cured coat of sealant in my humble opintion. Many sealants have a specific cure time so wait at least 12 hours. Try a small spot on the under side of the hood before taking the plunge just to be safe.
ScottB
06-25-2011, 03:05 PM
You can top a sealant (Rejex) with a wax, just make sure Rejex has has 12-24 hours to cure fully.
Garry Dean
06-25-2011, 03:06 PM
Never heard of Rejex so I looked it up. It looks like it would work to me. Souveran is a sacraficial shine coat with no cleaning ability so it should not hurt a cured coat of sealant in my humble opintion. Many sealants have a specific cure time so wait at least 12 hours. Try a small spot on the under side of the hood before taking the plunge just to be safe.
:iagree:Very well said.
Perfections
06-25-2011, 03:26 PM
Yep you sure can :)
master detailer
06-25-2011, 10:12 PM
rejax has on the back not to use a topper on it .
mg6045
06-26-2011, 01:25 PM
rejax has on the back not to use a topper on it .
I'm about 1000% sure that they state that for the fact that most OTC wax's are actually cleaner wax's and will remove the Rejex.
a true finishing wax does not have abrasives and should not remove cured rejex.
and to quote what the bottle actually states is :
"Do not apply waxes or polishes over RejeX, as the abrasives found in these products will remove the RejeX protection"
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.