View Full Version : Advice on what to do
Matt575
06-06-2011, 06:19 PM
I am in the middle of swirl correction on half my vehicle (other half next week). I am going to coat it with WGDGS after an IPA wipedown. My final step will be Collinite 476. I am wondering if I should do 2 layers of WGDGS before the 476 or is that absolute overkill. I'm going strong because we are leaving in 3 weeks for a 3 week 6,000 mile road trip through the west and south.
Thanks for any advice you can give!! Im the MAN
Matt575
06-06-2011, 07:48 PM
:bump:
No one has any advice??????
Kristopher1129
06-06-2011, 08:07 PM
I'm gonna go with overkill. Two coats of sealant IMO is absolute overkill. Especially with WGDGPS. I use that sealant pretty much every single day on vehicles. That stuff is plenty strong on it's own.
If you're going to throw a coat of wax on top of the sealant...you will be more than fine. :dblthumb2:
Dr Oldz
06-06-2011, 08:09 PM
476 is very durable! That being said, I would personally just go with one coat of each.
Perfections
06-06-2011, 08:58 PM
Fwiw put the 476 down first
Matt575
06-06-2011, 09:59 PM
Fwiw put the 476 down first
Why's that?
DARK HORSE
06-06-2011, 10:07 PM
I would put the WGDGPS down first. Sealant first, then carnauba.
Dr Oldz
06-06-2011, 10:14 PM
I would put the WGDGPS down first. Sealant first, then carnauba.
Correct!:iagree:
Perfections
06-06-2011, 10:26 PM
476 last longer then wgdgps
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.