Jeweling with flex. What speed/pad?

[Soilsample]

Hi guys!
My truck has been polished with 105/205 and is looking really good. No swirls... Only a few RIDS.
I currently have Wolfgang DGPS topped with 845 on it.

I would like to spend some time trying to really jewel the finish. I plan to use Wolfgang final finish glaze 3.0 and my Flex.

Question is what speed should I use and what pad? I have red or white finishing pads.

Thanks!
Donald

[Rsurfer]

Hi guys!
My truck has been polished with 105/205 and is looking really good. No swirls... Only a few RIDS.
I currently have Wolfgang DGPS topped with 845 on it.

I would like to spend some time trying to really jewel the finish. I plan to use Wolfgang final finish glaze 3.0 and my Flex.

Question is what speed should I use and what pad? I have red or white finishing pads.

Thanks!
Donald
Try doing a small section with the red pad, but it may be a waste of time. Using a rotary with a black/blue pad and 85rd might make a small difference.

[Soilsample]

So you don't think that the WG Finishing Glaze will improve over what was left behind after the 205?

Thanks
Donald

[Bunky]

Use the red pad, speed 5.5 to 6, and work like a normal polish including reducing the pressure slightly on the final passes. The actual results depends on your paint.

[fredcandetail]

i dont think you can jewel with with the flex as its dual action.. you can jewel easier with a rotary and the lightest pad you have

[loudog2]

i dont think you can jewel with with the flex as its dual action
With forced rotation. You can jewel fine with the flex.

[Soilsample]

Ok thanks.
My truck is a black dodge ram. 2008.
The black has lots of metallic under it. I think I can give it more pop.

Thanks!