Looking for a glaze..

[cobraa]

I'm looking for a glaze that can hide swirls or holograms. Sometimes on black colored car I don't have enought light to be 100% sure there's nothing left behind and a good hiding glaze could be that safety product.

I know it's not right to hide defect, better remove them. I know I know but sometimes, I work for some bodyshop, they sand the car and I have 6 hours to do my best. Obvsiouly, I have to hit my wool pad and Heavy compound. Usually, after I go with an orange pad and a mid swirl remove and then a white pad with light polish but sometimes it's not enought.. so a glaze could be fun.

Anyways, in my toolbox I have

Red moose ( didn't try it yet)
Menzerna Finishing glaze
Malco rejunavator II.

I would say I prefer Malco because it seems to have some slight abrasive in it instead of nothing for the Menzerna..

Should I be better with Meguiars #9, Poorboys Black hole, XMT 360 ?

Thanks!!Im the MAN

[sulla]

Autoglym super resin polish

[Larry A]

Black Hole is great.

[rbss]

I havnt tried it yet but I hear Black Hole is the best.

[bmp auto detail]

Pinnacle XMT Carnauba Finishing Glaze.

[01GreyStangGT]

+1 for the Black Hole

[05xrunner]

I love Poor Boys black hole..I use it all the time on my mustang..it also makes the car look dripping wet and gives it a super slick finish.

[cobraa]

I used black hole in the past but at that time I didn't had a machine. so onply applied by hand.. does blacohole have abrasive that can level down ( let say 2500-3000) grit?

[ronkh57]

I use PB BH and have great luck with it.

Haven't used two of what you listed but I can tell you that RMG will NOT work under a sealant. It's an oil base glaze and won;t work If you use it you have to use a wax over it, not sealant

[cobraa]

I use PB BH and have great luck with it.

Haven't used two of what you listed but I can tell you that RMG will NOT work under a sealant. It's an oil base glaze and won;t work If you use it you have to use a wax over it, not sealant

oh thanks! great info.