PDA

View Full Version : 02 Porsche 911 1 step/Fuzion



Pages : [1] 2

Perfections
01-23-2011, 11:18 PM
Got to detail something better then my usual grocery getter. A 2002 Porsche 911 non-turbo. Process was inspection, talked to customer, decided a nice claying with 1 step polishing would fit the bill for expectation level, aiming for 50-60% defect removal.

Products used

DP Xtreme Foam Formula High Yield Foaming Auto Shampoo- Foamaster gun car wash (http://www.autogeek.net/foam-gun-soap.html) Great foaming product with good cleaning ability

Pinnacle’s Ultra Poly Clay is the single finest clay composition available today. Use auto Detailing clay to deep clean car paint, glass and chrome. (http://www.autogeek.net/ultra-fine-poly-clay.html) went with this clay as its super fine with little to no marring but still cleans paint extremely well

For the one step played around with a few polishes decided on Optimum Polish is a swirl remover, finishing polish & paint cleaner in one for the optimum shine! swirl remover polish, fine grade polish, final (http://www.autogeek.net/opt400.html) via Griots D/A with Lake Country Hydro-Tech 5 1/2 x 7/8 Inch Foam Pads , hydrotech foam pads for water-based polishes, lake country foam pads, buffing pads (http://www.autogeek.net/hydrotech-low-profile-pads.html) Tangerine pads in some spots and Griot's Garage 6 Inch Orange Polishing Foam Pads, Foam Polishing Pads, Griots Orange Foam pads, orbital buffer pads (http://www.autogeek.net/griots-foam-polishing-pads.html) in others

LSP was nothing but the best Wolfgang Fuzion Estate Car Wax contains real carnauba wax and paint sealant polymers to protect paint. ultimate show car wax, auto wax, paste wax, (http://www.autogeek.net/wolfgang-fuzion-carnauba-polymer-car-wax.html) via Griots D/A with Lake Country Hydro-Tech 5 1/2 x 7/8 Inch Foam Pads , hydrotech foam pads for water-based polishes, lake country foam pads, buffing pads (http://www.autogeek.net/hydrotech-low-profile-pads.html) Crimson Pad

Tires cleaned with Meguiars All Purpose Cleaner Plus D103 (http://www.autogeek.net/meguiars-all-purpose-cleaner-plus-d103.html) 3:1 Dressed with Optimum Opti-Bond Tire Gel, Tire gel protectant, OPT Tire Dressing Gel, protect tires, optibond tire gel (http://www.autogeek.net/optimum-opti-bond-tire-gel-128oz.html) 1:1

Enough talking heres some pics....enjoy :)

Before
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03356.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03357.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03360.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03366.jpg

Letting the foam dwell :)
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03369.jpg

Inspection after cleaning looking for problem areas
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03372.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03382.jpg

After Polishing
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03385.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03387.jpg

Fuzion Pic
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03383.jpg

After Pics
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03389.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03390.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03391.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03392.jpg
http://i269.photobucket.com/albums/jj72/mojosuperhero/DSC03395.jpg

DetailedByPrecision
01-23-2011, 11:24 PM
looks great

Shawn T.
01-24-2011, 07:50 AM
Nice color on that Porsche. Looks very good.

SeaJay's
01-24-2011, 08:08 AM
Nice work!

J1nx93
01-24-2011, 11:59 AM
Great job man. How do you like the diluted Opti-Bond compared to full strength, btw?

Bobby B.
01-24-2011, 12:34 PM
Awesome job! The Porsche looks great. Keep up the great work.

GaDetailDoc
01-24-2011, 01:03 PM
One step process :xyxthumbs: turned out pretty good...

Meghan
01-24-2011, 02:03 PM
Got to detail something better then my usual grocery getter. A 2002 Porsche 911 non-turbo. Process was inspection, talked to customer, decided a nice claying with 1 step polishing would fit the bill for expectation level, aiming for 50-60% defect removal.


This is the most important part, you talked with the customer and the plan that was decided was not a 100% perfect. You made a plan based on what the customer was willing to pay and executed it. So many get high and mighty and think all details must be 100% perfect, but not all customers are will to pay for that. Know your limits based on time and compensation and get a plan. Very nicely done!! I absolutely love the color on that car.

Perfections
01-24-2011, 02:27 PM
looks great


Nice color on that Porsche. Looks very good.


Nice work!


Awesome job! The Porsche looks great. Keep up the great work.


One step process :xyxthumbs: turned out pretty good...

Thanks for all the kind words :) It wasn't 100% defect free, but the customer was super excited with the outcome and in the end thats what matters, detailers putting smiles on peoples faces one car at a time!

Perfections
01-24-2011, 02:31 PM
Great job man. How do you like the diluted Opti-Bond compared to full strength, btw?

I use 1:1 because I carry an air compressor with me and use a spray paint gun to apply dressings, alot less wasted product :) Full strength is ok for some customers, others dont like how shinny it is. Discuss this with your customer before hand and you wont have any problems, as I always ask do you like the shinny look or more of a satin look, and at the same time ask them about interior dressings, although I convince most to go with the less greasy look on dashes due to reflections from the sun getting in their eyes :)

Perfections
01-24-2011, 02:36 PM
This is the most important part, you talked with the customer and the plan that was decided was not a 100% perfect. You made a plan based on what the customer was willing to pay and executed it. So many get high and mighty and think all details must be 100% perfect, but not all customers are will to pay for that. Know your limits based on time and compensation and get a plan. Very nicely done!! I absolutely love the color on that car.


Thanks Megan and you are 100% correct, good communication between the detailer and customer is very important! Not only does it make you look professional, it also builds trust, and makes the customer feel like part of the whole detailing process, building long term customers :) As they will always get what they want and feel like they are getting exactly what they are paying for.

bimmer325!
02-01-2011, 08:42 PM
Well done my friend! Not surprised at all at the results. You take you work seriously and get consistent professional results..and you manage to have fun in the process. (Just don't tell the customers you would really do it for free!!! J/K )

Perfections
02-01-2011, 09:16 PM
Well done my friend! Not surprised at all at the results. You take you work seriously and get consistent professional results..and you manage to have fun in the process. (Just don't tell the customers you would really do it for free!!! J/K )

Haha Roger, your right I would do it for fun....if I was rich and didnt need to make a living, but until then I'll be :buffing: my butt off. Cleaning up the little town of Buna 1 car at a time :)

Kristopher1129
02-01-2011, 10:03 PM
This is the most important part, you talked with the customer and the plan that was decided was not a 100% perfect. You made a plan based on what the customer was willing to pay and executed it. So many get high and mighty and think all details must be 100% perfect, but not all customers are will to pay for that. Know your limits based on time and compensation and get a plan. Very nicely done!! I absolutely love the color on that car.

I agree. Most customers don't even have the eye to see what you're trying to point out to them! I've come across that many times. I'm trying to show them the micro scratches...and they're looking at me like I have two heads.

That's when you know...maybe I should come down a notch, ha.

My trick is I usually try to explain the highest level service first...see how they take it. Usually they'll either do one of two things. One, they'll say..."well, I'm more looking for just...". Or two, they'll be intrigued and get involved in a back and forth conversation cause they're actually interested in possibly getting the works! As long as you can see eye to eye with someone...you've locked in a customer. :buffing:

Nice job OP! Looks like a mirror! :dblthumb2:

taholman
02-01-2011, 10:42 PM
Much love for the porsche. looks good.