Dilution ratios for 32oz bottles

[Dr Oldz]

1:1 = 16oz
2:1 = 10.67oz
3:1 = 8oz
4:1 = 6.4oz
5:1 = 5.33oz
6:1 = 4.57oz
7:1 = 4oz
8:1 = 3.56oz
9:1 = 3.2oz
10:1 = 2.91oz
12:1 = 2.46oz
15:1 = 2oz
20:1 = 1.52oz

[Dr Oldz]

To add to the above!
Here is the amount of product to add to a 32oz bottle then fill with water for a TOTAL of 32oz!
EXAMPLE - To make a 32oz solution of APC at a 3:1 ratio add 8oz concentrated APC and fill with water!(You will be adding 24oz water TOTALING 32oz) Say for a 15:1 solution, you will add 2oz concentrated APC and fill with water(You will be adding 30oz of water TOTALING 32oz)
If you are using a 16oz bottle, cut the amount in half and fill container with water. So to make a 16oz solution of APC at 3:1 you will use 4oz of concentrated APC and fill with water(here you will be adding 12oz of water TOTALING 16oz)

[sydster]

That is really useful. Thanks!
:props:

[slickooz]

Good for bottles that aren't label. I got mine at Autozone and they are only label up to 10:1 so I just have to estimate if I need something more diluted.

[James K]

Very helpful. Thanks!

[Crazy Amos]

You da man-thanks buddy!

[DaHen]

Now I don't havta get my calculator out every time.

Thanks muchly.

[jimmyjam]

:goodpost: Thanks Dr Oldz!!

[BobbyG]

It's difficult to argue with facts.......:dblthumb2:

Thanks Doc! :props:

[mg6045]

great advice , THX !

[bigjake1907]

Thank you, Thank you !!! This is just what I have been trying to find out for the last week.

[daveo]

This and the original one by Mike P should be a sticky. Very helpful info.

Dave

[Belair]

Just want to bump this very useful thread.

[Mobile detail]

this could come in handy. I like it/

[CaneCharger]

This is awesome info!