PDA

View Full Version : Cleaning Brushes



ryanbabz71
12-12-2010, 08:53 PM
For the guys who use the cycle to clean carpets how/what do you use to clean the brushes? I did a few spots on the carpet in the house and I have little carpet hairs stuck in the bristles and I cannot remove them. I will post a pic as soon as I can. Thanks!

PAR Detailing
12-12-2010, 09:07 PM
I take a razor blade and start running it throught he bristles. It glides inbetween them, doesnt hurt them, and it really pulls out all of the carpet fibers. Atleast in my experience it works great!

Edit: I didnt know you were referring to the cyclo brush attachment. I use it for my carpet brush but the bristles should be similar... nylon probably. Same system should work for you
Jon

ryanbabz71
12-12-2010, 10:29 PM
Here are a few photos

PAR Detailing
12-12-2010, 10:40 PM
Ya try the razorblade. It worked perfectly for me. I've used razorblades and box cutters. Both work. It cots the fibers and they just come out. I stumbled on this by dumb luck

ryanbabz71
12-12-2010, 10:47 PM
Thank you for the tip. I will try it once I scrub out a few stains the dog decided to leave in the hallway (puked)

ryanbabz71
12-15-2010, 09:00 PM
Well I tried out the razor blade tip tonight. Worked like a charm. Takes some time and I didnt get it 100% clean but it was amazing the crap that came out of the brushes. Thanks again for your help!

PAR Detailing
12-15-2010, 09:22 PM
Well I tried out the razor blade tip tonight. Worked like a charm. Takes some time and I didnt get it 100% clean but it was amazing the crap that came out of the brushes. Thanks again for your help!

No problem! Im glad I could help

kkritsilas
10-24-2016, 05:10 PM
Cyclo's site says to usea a pet comb, like you would use to comb out the fur on your pet.

postaltwo
10-25-2016, 06:24 PM
Cyclo's site says to usea a pet comb, like you would use to comb out the fur on your pet.

Good tip

tomvardy1511
10-26-2016, 10:07 PM
Thanks for informaition, it is good

kkritsilas
10-26-2016, 11:04 PM
Video is here:

How to Clean Your Cyclo Brushes Video (http://www.cyclotoolmakers.com/cleaning-polisher-scrub-brushes.php)

Whitewater25
10-27-2016, 09:32 AM
I used a stainless wire brush with the longer strands. I had one on hand & tried it and seemed to work well.

mrlinh15
12-12-2016, 11:01 PM
great video, thanks for sharing

MarkD51
12-13-2016, 06:44 AM
Since you have a dog, and like the video shows, see if you can find a dog brush at the pet stores, etc. They can serve double duty for also getting dog hair out of the dog's wire hair brushes. The teeth spacing is wider on these.