PDA

View Full Version : Klasse All In One and PC 7424XL



mcneguy
11-22-2010, 04:02 PM
Can you use Klasse All in One on a CCS Orange pad to remove slight oxidation or should I get something else?

350z00m
11-22-2010, 04:07 PM
i think u can... i've used pc and Pin XMT 360 with orange ccs and come out lsp ready.. i'm sure i could have done more and finnish off with white pad but came out good with just orange and xmt 360. just do a test spot first and see if it comes out the way u wanted to... so u dont waste time doing th whole car and not getting what u want .... all ways test spot! 8).... are u doi a one step?

mcneguy
11-22-2010, 04:18 PM
I bought the Forum favorite kit some time ago so I am following that flow..Wash, clay bar, polish, glaze, wax. The difference this time is I bought the 7424 to do a better job than my arm would.

350z00m
11-22-2010, 04:23 PM
depending on the finnish f the car and type of clear coat, and how bad the oxidation is... might need something with alittle more bite then the KAIO...always work from least aggressive first.