PDA

View Full Version : Applying wax on top of sealant via machine..


Apokiliptik1
11-05-2010, 12:05 PM
Ok so I am pretty sure this has been answered before but I couldn't find a thread on it. My question is after the sealant has cured and ready to apply wax , will applying wax via machine will the machine some how take any of the sealant off?
WRAPT C5Z06
11-05-2010, 03:35 PM
Use a soft pad(blue), speed 3, and you will have no problems.
BobbyG
11-05-2010, 04:49 PM
As long as you're not using a cutting pad you'll be fine. As Mark mentioned, a blue pad works well and so does the red. I too use both of these on speed 3 and have never had a problem....
Apokiliptik1
11-05-2010, 09:03 PM
ok thanks I have always applied sealants by hand so just didnt want to go and shoot myself in the foot.
fairlady350z
11-05-2010, 09:10 PM
As long as you're not using a cutting pad you'll be fine. As Mark mentioned, a blue pad works well and so does the red. I too use both of these on speed 3 and have never had a problem....

:iagree: I always use a red pad with liquid nattys blue after PB Ex-sealant and have never had any issues. Be sure to post some pictures of the final product! :buffing: