tsr-need help

[john b]

recently bought the tsr -tried to use it today on a hood outside-tempature around 65 degrees outside-usedpcxp used a 6.5 lc oarge pad -had it up 2 cranked up to 6-put a bead around outside and the pad looked like it kept gumming up after doing a 2 by 2 area-would that be due 2 the sun on the hood or to much polish?is there any tips i might need-it was not as easy to work withFeed back please

[snowking724]

Sun!

[Bunky]

recently bought the tsr -tried to use it today on a hood outside-tempature around 65 degrees outside-usedpcxp used a 6.5 lc oarge pad -had it up 2 cranked up to 6-put a bead around outside and the pad looked like it kept gumming up after doing a 2 by 2 area-would that be due 2 the sun on the hood or to much polish?is there any tips i might need-it was not as easy to work withFeed back please
Was the paint very warm to the touch? A large work area combined with a lot of polish may be drying to much.

Put just enough product to just spread over the work area like 18x18, spread it evenly for several passes at low speed, then work it properly (need slow movement, pressure, , multiple passes (time), speed 6) to break it down, and clean the pad often (at least every other panel). It does not take much polish (3 to 4 dabs).