Can I order this kit and replace one of the orange pads with a gray one?

[Speakerguy45]

This is the kit right here
Meguiars Swirl-Free Kit for Machine Application, Meguiars Swirl Remover Kit, Meguiars Machine Polishing Kit (http://www.autogeek.net/meguiars-swirl-remover-kit.html)

Is there a way that when i order I can get 1 Orange Light Cutting Pad and 1 Gray Finishing Pad instead of 2 Orange Light Cutting pads?

:)

[Dubbin1]

Call in your order and I'm sure they will fix you up but since you only have 1 orange pad right now I would go ahead and get the 2 that comes with the kit.

[Speakerguy45]

Call in your order and I'm sure they will fix you up but since you only have 1 orange pad right now I would go ahead and get the 2 that comes with the kit.

I think I would rather have 1 5.5" cutting pad and 1 5.5" finishing pad rather than 2 5.5" cutting pads and 1 6.5" finishing pad.
Just want to keep things even, but it's just my personal preference

Thanks for verifying that I can do this and good luck with completing your garage / airplane hangar :props:

[Dubbin1]

The reason I say to get the 2 orange pads is because you should really be using IMO at least 3 pads to do a correction on a whole car. Forget keeping things even, just fork out $7.99 and get another finishing pad ;)

[Bunky]

If you want any special subs, just PM Meghan. Give her your order number and she will take care of it. If you are unsure about it being acceptable, contact AG first.

[WRAPT C5Z06]

Forget keeping things even, just fork out $7.99 and get another finishing pad ;)
I have a feeling mom and dad are paying. :p

[Dubbin1]

I have a feeling mom and dad are paying. :p

Well if that's the case then get a 6 pad kit :)

[WRAPT C5Z06]

Well if that's the case then get a 6 pad kit :)
LOL....good point.

[Speakerguy45]

I have a feeling mom and dad are paying. :p

Nah, I made $80 bucks doing my neighbors PT Cruiser :props:

[WRAPT C5Z06]

Nah, I made $80 bucks doing my neighbors PT Cruiser :props:
:props:

[Dubbin1]

Nah, I made $80 bucks doing my neighbors PT Cruiser :props:

Good Job :dblthumb2: $80 is plenty to buy a pad kit :)

[Speakerguy45]

Good Job :dblthumb2: $80 is plenty to buy a pad kit :)

Yeah but pads are useless other than using them like Frisbees without the compound/polish lol :laughing:

[builthatch]

I think I would rather have 1 5.5" cutting pad and 1 5.5" finishing pad rather than 2 5.5" cutting pads and 1 6.5" finishing pad.
Just want to keep things even, but it's just my personal preference

sounds like some OCD goin' on there! haha, "i just want to keep things even" http://img.slash40.com/emotes/koolaid-door.gif

fyi an orange pad will be the pad you end up needing the most in terms of quantity, and for good reason. as mentioned you'll use it the most with a DA for correcting and will have to change the pads out several times depending on the size of the car.

[Mike Phillips]

Moved to Detailing 101

The Hot Topics and Frequently Asked Questions are for "Hot Topic Articles" and articles that answer Frequently Asked Questions, not for how-to questions...


:xyxthumbs: