Those who use the Flex 3401 to apply liquid LSP's, question...

[WRAPT C5Z06]

What speed do you use to apply LSP's?

[Impressions]

I use 2.5-3 on flex

[loudog2]

I usually put the flex away after corrections and go to the PC for LSP applications. It's a little lighter and can be used one handed.

[A4 1.8tqm]

3-4's good. :xyxthumbs:

[WRAPT C5Z06]

I usually put the flex away after corrections and go to the PC for LSP applications. It's a little lighter and can be used one handed.
I don't have anything other than the Flex 3401. :xyxthumbs:

[Mike Phillips]

I don't have anything other than the Flex 3401. :xyxthumbs:



Power Tools are to Men as Shoes are to Women... you can never have too many...



:laughing:

[WRAPT C5Z06]

Power Tools are to Men as Shoes are to Women... you can never have too many...



:laughing:
You're absolutely right. :laughing: What speed would you use with the 3401 to apply liquid LSP's?

[wytstang]

I use speed 3 and a blue pad. There is something fun about popping wax out of it's tin and lightly coating the whole 6.5 pad and spreading it over 3/4 of the car that's just fun to watch. I just make a small x to finish the rest.

[Mike Phillips]

You're absolutely right. :laughing: What speed would you use with the 3401 to apply liquid LSP's?


The 2-3 setting...

When applying a "finishing" wax or paint sealant you don't need lots of power, you just need to do a good job of spreading the product out...

Too slow a speed setting and it can feel like the pad is lagging behind as you're trying to move the polisher along...


:)

[The Critic]

I used speed 3 and it worked great.

[Dubbin1]

Anything under 3 feels like you're dragging the pad. Personally I never liked applying with a machine so I only apply by hand now.

[C. Charles Hahn]

Power Tools are to Men as Shoes are to Women... you can never have too many...



:laughing:

Amen, brother! :iagree:

[BobbyG]

I use a speed of 3 on the Flex 3401 and the Porter Cable 7424 with either a blue or red pad..... Works real slick!

[WRAPT C5Z06]

Thanks everyone. :dblthumb2:

[alexjn1]

speed 3 for me