View Full Version : Which LC pad to use with Diamondite Glass Poly-Shield?
Silverstone
09-12-2010, 11:50 PM
I see the kit Diamondite sells comes with a pad but I just have the one bottle of PolyShield. Which one of my LC pads should I use?
Mike Phillips
09-13-2010, 08:00 AM
Something soft, you're not cleaning glass with Glass Poli-Shield, you're sealing the glass, think of it the same way you would think of applying a finishing wax or show car wax to paint.
All you need is to spread the product out over the surface.
From the product page...
Diamondite® Glass Repair System Kit for Machine Application (http://www.autogeek.net/glass-repair-kit.html)
Step 2 - Glass Poli-Shield
Remove the leveling disc and replace it with the Gel Applicator Pad. Apply an X of Diamondite Glass Poli-Shield across the pad and turn the polisher on between 800-1000 RPM. Work in an overlapping motion until a 2 x 2 sq. ft. area has been covered.
You are just applying product so there is no need to apply pressure. Wipe the surface clean using a microfiber towel.
:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.