PDA

View Full Version : A quickie we did...


Pages : [1] 2
Redneckmafia
08-02-2010, 05:18 PM
A neglected 2006 Mustang. the owner wanted a wash and wax. We did it all in about 3 hours and with some great products we did it all without claying the paint.Now there are some scratches,chips and swirls but the owner did not want to be that extensive.Here are the results....
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustan003.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustan005.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang002.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang017.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang005.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang016.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang006.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang019.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang020.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/06blkmustang021.jpg
gibbsj87
08-02-2010, 06:13 PM
very nice work
WRAPT C5Z06
08-02-2010, 07:33 PM
:xyxthumbs:

What products did you use?
Flash Gordon
08-02-2010, 07:49 PM
The paint looks fantastic. The mods = fail
Maxima Mom
08-02-2010, 08:08 PM
What did you use on the tires? It looks fantastic!:props:
Redneckmafia
08-02-2010, 08:19 PM
A few more pics...
http://i181.photobucket.com/albums/x74/JCianfrocca/blkmust006.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/blkmust005.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/blkmust002.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/blkmust001.jpg
Rsurfer
08-02-2010, 08:24 PM
Good job for 3 hrs.
WRAPT C5Z06
08-02-2010, 09:10 PM
The mods = fail
lol...yep!
Rsurfer
08-02-2010, 09:14 PM
lol...yep!Is it because it looks front heavy?
WRAPT C5Z06
08-02-2010, 09:31 PM
Is it because it looks front heavy?
You got it. There's way too much going on with that front splitter. However, as long as the owner likes it, that's what matters.
Flash Gordon
08-02-2010, 10:15 PM
You got it. There's way too much going on with that front splitter. However, as long as the owner likes it, that's what matters.

That and the 4.0 nitrous injection plack on decklid :rolleyes:
Redneckmafia
08-02-2010, 11:23 PM
You got it. There's way too much going on with that front splitter. However, as long as the owner likes it, that's what matters.


That and the 4.0 nitrous injection plack on decklid :rolleyes:
Actually the badge is now just a 4.0 now.I was given a new one by the owner and changed it out.The front end is a little more than my liking but everyone has their own taste.He will be bringing it by soon so I can cut a coil or two out of the rear spring to level the car. It used to have a nitrous kit on it till he decided it is his daily driver and did not need to break something..:hotrod2:
Rsurfer
08-03-2010, 02:11 AM
You got it. There's way too much going on with that front splitter. However, as long as the owner likes it, that's what matters.
Would he have been better off dropping cause there's a big gap between the fender and wheel.
Dubbin1
08-03-2010, 08:12 AM
It used to have a nitrous kit on it till he decided it is his daily driver and did not need to break something..

What a sissy, now hows he gonna pass anyone :)
Flash Gordon
08-03-2010, 10:31 AM
Actually the badge is now just a 4.0 now.I was given a new one by the owner and changed it out.The front end is a little more than my liking but everyone has their own taste.He will be bringing it by soon so I can cut a coil or two out of the rear spring to level the car. It used to have a nitrous kit on it till he decided it is his daily driver and did not need to break something..:hotrod2:

Redneck, I'm not trying to give you a hard way. Your work looked great, and if you would've stated this was your car, then I would've reserved comment. I realize you were not the designer, beleive me I've worked on my share of cars where I asked myself ### were they thinking

That mustang is a ricer IMO Im the MAN