View Full Version : PCXP just arrived!
pokerbob781
06-30-2010, 09:11 AM
Hi,
I just received my entire kit from AG and had a quick question. My PC came with the original White pad that you can screw into the PC. What is this used for? I have the 5 inch plate that I will be using with LC pads.
Thanks,
DARK HORSE
06-30-2010, 09:21 AM
Hi,
I just received my entire kit from AG and had a quick question. My PC came with the original White pad that you can screw into the PC. What is this used for? I have the 5 inch plate that I will be using with LC pads.
Thanks,
That pad is junk and should not be used on your paint. I recommend tossing it in the garbage...Some will say you can use it with a MF bonnet over it, but I also do not recommend using MF bonnets...(Just my opinion)...
pokerbob781
06-30-2010, 09:27 AM
That's what I figured and I dont see people on here using a bonnet too often. I'll go in my box of extras I guess.
With my 5 inch backing plate, Do I use the plastic looking washer?
DARK HORSE
06-30-2010, 09:28 AM
That's what I figured and I dont see people on here using a bonnet too often. I'll go in my box of extras I guess.
With my 5 inch backing plate, Do I use the plastic looking washer?
If this is the one you are talking about...
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02372.JPG
Yes, definitely!
Mike Phillips
06-30-2010, 09:35 AM
You've probably already seen these but for any lurkers reading this thread...
How To Remove Swirls, Scratches and Water Spots using a PC 7424XP, Meguiar's G110v2 or Griot's Garage 6" Random Orbital Polisher
Using a DA Polisher - Part 1
- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher
Using a DA Polisher - Part 2
- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher
Using a DA Polisher - Part 3
- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher
Most Important...
Here's how to do a "Section Pass" when trying to remove swirls, scratches and other below surface paint defects.
How to do a Section Pass
[ame=http://www.youtube.com/watch?v=Q70g83mnTn4]YouTube - How to do a "Section Pass" with a Porter Cable 7424XP[/video]
Visit Autogeek's YouTube Channel for more YouTube Videos (http://www.youtube.com/autogeek)
The Definitive How-To Article for Removing Swirls, Scratches and Water Spots Using a Porter Cable 7424XP, G110v2 or Griot's Garage Polisher (http://www.autogeekonline.net/forum/tricks-tips-techniques/20021-definitive-how-article-removing-swirls-scratches-water-spots-using-porter-cable-7424xp-g110v2-griot-s-garage-polisher.html)
:buffing:
pokerbob781
06-30-2010, 09:52 AM
That's exactly it.
Mike, I've watched your videos many times but I think I'll watch it one more time before I try it out for the first time.
Thanks guys,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.