PDA

View Full Version : Klasse combo


Shane731
06-27-2010, 01:32 PM
Looking for pics of cars that have the Klasse Combo (AIO and Sealant glaze) on them. Preferably light colored cars like white, silver, and beige, but any color will do. Also please share your process before application (clay, correction, etc.). Thanks!
Redneckmafia
06-27-2010, 02:51 PM
Here are a few pics of a few vehicles we have detailed lately. we washed, clayed washed again then put Klasse AIO only on them and the results were great...
http://i181.photobucket.com/albums/x74/JCianfrocca/CianfroccaAutoDetail030.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/CianfroccaAutoDetail029-1.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/CianfroccaAutoDetail038.jpg
http://i181.photobucket.com/albums/x74/JCianfrocca/CianfroccaAutoDetail008.jpg
Laura
06-27-2010, 09:38 PM
I just did this Lexus last week with the Klasse twins. I love the products, but the sealant is a pita to get off. I use a little QD when buffing. I washed, clayed, AIO, then sealant.

http://www.autogeekonline.net/gallery/data/500/medium/After_full_shot.jpg
http://www.autogeekonline.net/gallery/data/500/medium/After_full_shot_driver.jpg
Shane731
06-27-2010, 09:46 PM
I love the products, but the sealant is a pita to get off. I use a little QD when buffing.

How did you apply and remove the sealant? Did you do the whole car and then remove or just a panel at a time?
Grizzly
06-27-2010, 09:59 PM
You cant tell how it looks by looking at a picture.
Laura
06-27-2010, 10:09 PM
How did you apply and remove the sealant? Did you do the whole car and then remove or just a panel at a time?

I did the whole car and let it set while I did the interior. Then I went back and removed it. I applied it with my PC so I just had a very thin layer on there. The QD might not have been totally necessary, but I hate having to almost scrub to get the tough spots. Plus, I was hot and tired by then.
Mike Phillips
06-28-2010, 07:55 AM
I love the products, but the sealant is a pita to get off.




This is why I caution people to apply the Klasse SG or Sealant Glaze to about a one foot square section to test it out before going over the entire car, that way there's no surprises.

Anyone reading this can feel free to share this tip anytime you see a thread about someone going to use the KSG for the first time.

At least you got it off...


:xyxthumbs: