Lake County pads

[m4bama]

What size pads should i use with a Griots porter house polisher eitther the 6.5 or the 7.5 pads.
What CCs pads from Lake County should i use for a All-in-one step product also pad recomendations for with a product with cut of 3 to 4

thanx
m4bama

[loudog2]

I would use the 6.5 flat pads, unless you have a option to use a 5 inch BP with the 5.5 inch pads.

For one step products I usually go with the soft green and white if I need to bump it up.

[Dubbin1]

If you mean Griot's Garage 6 inch Random Orbital Polisher (http://www.autogeek.net/griots-random-orbital-polisher.html) then 4", 5.5" and 6.5" pads and proper backing plate is what you want.

Personally I would stick with the 4" and 5.5" only.

[maximus20895]

I also like the flat pads vs the ccs ones.

[MadMerc]

I use the 6.5 pads. They work very well.:xyxthumbs:

[maximus20895]

^what DA do you have?

[MadMerc]

I have the Griot's, too.

[Kurt_s]

I have 6.5" CCS and 4" flat pads with a PCXP. I would imagine that the Griots and PCXP should perform similarly.

The 5.5" should correct quicker and handle small and tight curves better than the 6.5". I plan to add a 5" backing plate at some point and move towards the 5.5" pads. I think that I like the flat pads better but I have compressor pads coming. I will share my thoughts after I get a chance to try the compressor pads. I'm a hobbiest not a professional, so this is my 2 cents worth.

[WRAPT C5Z06]

If you mean Griot's Garage 6 inch Random Orbital Polisher (http://www.autogeek.net/griots-random-orbital-polisher.html) then 4", 5.5" and 6.5" pads and proper backing plate is what you want.

Personally I would stick with the 4" and 5.5" only.
:iagree:

[Meghan]

I find the Griots works really well with the 6.5" pads although I personally like to work with the 5.5" CCS pads. Its all about what you like.

[WRAPT C5Z06]

I find the Griots works really well with the 6.5" pads although I personally like to work with the 5.5" CCS pads. Its all about what you like.
Ya know, this is probably the best answer so far regarding the Griot's. :dblthumb2:

[m4bama]

OK I will use th 6.5 inch pads and a backing plate came with it so since the pads come with velcro on the backside to stick them onto the polsher with.