View Full Version : Exclusive First Release -- Optimum Spray Polish
ScottB
05-26-2010, 04:13 PM
Optimum Hyper Polish Spray, Optimum spray polish, hyper spray polish, Optimum car polishes (http://www.autogeek.net/optimum-hyper-polish-spray.html)
Locutus
05-26-2010, 04:27 PM
How does it compare to MG105. It also says use a rotary or orbital, will it not do will with a DA like the PC?
HighEndDetail
05-26-2010, 04:29 PM
Nice, I heard about this at DTF
Scott you won"t mind if I use your cc and order some :D:D
rwright
05-26-2010, 04:30 PM
We need a review of this product as soon as possible!
Mike Phillips
05-26-2010, 04:53 PM
How does it compare to MG105. It also says use a rotary or orbital, will it not do will with a DA like the PC?
Hyper Polish is a light cutting polish. M105 is an aggressive compound.
Hyper Polish uses bot SMAT and DAT.
M105 uses SMAT.
They don't compare very well because they are different types of products.
:)
Da Fats
05-26-2010, 04:57 PM
Info can be obtained on OPT's site forums. The new pads they are developing sound interesting also
Mike Phillips
05-26-2010, 05:08 PM
This is a 2003 Honda Civic LX with a very neglected clear coat finish that is also very oxidized. The oxidation doesn't show up well in the Studio but I have not buffed out the rest of the car so I'll take some shots that show the true condition of the paint tomorrow in the sunshine.
That said, the close-up of the overhead fluorescents isn't too bad...
This was done with a Porter Cable DA Polisher using a 5.5" light orange flat cutting pad and Optima Hyper Polish.
There is no wax or sealant on the paint...
http://www.autogeekonline.net/gallery/data/868/HyperPolish000.jpg
http://www.autogeekonline.net/gallery/data/868/HyperPolish001.jpg
http://www.autogeekonline.net/gallery/data/868/HyperPolish002.jpg
Mike Phillips
05-26-2010, 05:40 PM
David Ghodoussi was here on Tuesday and we shot some video footage using the new Optimum Hyper Polish with both a DA Polisher and a Rotary Buffer, stay tuned, that video should be up this week.
Oh yeah... it was a blast working with David!
http://www.autogeekonline.net/gallery/data/868/HyperPolish003.jpg
Alex Boyce
05-26-2010, 10:33 PM
looking forward to hear more about this product.
SRHTX
06-09-2010, 08:34 PM
My product arrived this evening. I will be using it on an '09 Ford F-150 4x4 King Ranch. I do not know what the paint is like at the present time, but as I know him, it will be nice and clean. I'm not sure if the paint needs to be clayed at this time.
Of course, I will have before and after pictures of the truck and post them on the site(s) Friday evening.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.