PDA

View Full Version : Finished product 05 Stang from body shop thread



_M_
05-09-2010, 11:17 PM
I dont have all the befores because I didnt take a lot. The car turned out ok. A few places here and there I need to go back and work on.

One lesson learned...I need some new microfiber. Some of the work I did from this thread http://www.autogeekonline.net/forum/show-n-shine/25435-new-paint-body-shop-time-break-out-flex-sip.html was negated by bad/old microfiber...get ready for an order autogeek.

Also this is the first time I experimented with different combos of pad/product versus the traditional steps. Got some great results with SIP and white pads.

Products were as follows:
SIP and Nano
LC flat pads and CCS pads
DP Xtra foam
DP Gel Wheel Cleaner
DP 4-n-1 or Rinseless
DP clay
Flex
Megs Show Car Glaze for the new paint
DG 111 for the rest of the paint (first time using this, wanted to try it and WOW I love it)
Z-8 Finale Spray


Anyway, here's the finished photos:

http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2616.jpg
http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2630.jpg
http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2627.jpg
http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2623.jpg
http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2618.jpg
http://i296.photobucket.com/albums/mm198/AutogeekM/clean%20car/IMG_2620.jpg

bodavenport
05-10-2010, 01:31 PM
love the ride, FR-500's are sweet!

RaskyR1
05-10-2010, 03:00 PM
Nice work! :dblthumb2:

Mike Phillips
05-10-2010, 03:38 PM
Looks great...

Good to hear you were able to undo the damage done at the body shop...


:xyxthumbs: