PDA

View Full Version : I want a 1-step polish. I.e: xmt 360.


cobraa
05-01-2010, 10:41 PM
Hey guys,

I would like to buy some all-in one polish for customer's car that doesn't want to pay or just want a QUICK detail to sell the car. Instead of using SSR2, then having to deal with some hologram on dark-colored car ( sometimes) and then waxing the car.

I'm currenctly using Malco rejunavator for those quick job but I think it's more a glaze/filler. But I love how easy it's too apply and very slick. I can only think about 2 products; XMT 360 and Opti-seal. Is there anything else?


I would like a product that finish slick and glossy, that can remove a bit of swirls and contains wax or sealant so I don,t need to wax the car after.

Thanks for the tips!:props:
Dubbin1
05-01-2010, 11:05 PM
360 is what you're looking for.
Shane731
05-01-2010, 11:38 PM
I can only think about 2 products; XMT 360 and Opti-seal. Is there anything else?

I think you mean Poli-Seal, not Opti-Seal.
Lasthope05
05-01-2010, 11:43 PM
I like D151 if its a really damaged finish. It has the most cut out of all the AIO's out there and leaves behind decent protection. My personal favorite is optimum poli-seal. Good correction and leaves a really slick finish behind. I also have XMT 360. It works well,but is pretty pricey compared to the other AIO's out there.
mad992
05-02-2010, 02:34 AM
ive had great results with poorboys polish with sealant...PWS.......slick and glossy finishes up well
A4 1.8tqm
05-02-2010, 04:41 AM
I can vouch for both Poorboy's PwS and XMT 360, both are great products to do what your looking for. I'd really like to try D151 and Poly-seal...
rwright
05-02-2010, 06:04 AM
You should still follow up with a coat of wax because the amount that's in the AIO's is not enough for real protection. Sure they will get by for a very short period, but do you really want that hanging over your head? It's not that difficult to add a layer after your AIO session.
A4 1.8tqm
05-02-2010, 06:09 AM
:iagree: and these polishes provide a great base for a nice Carnauba IMO.
ScottB
05-02-2010, 07:48 AM
360 or Optimums Polyseal ...
HighEndDetail
05-02-2010, 08:52 AM
Meg,s D151 also one of my favorites is Poorboys PwS
Emile
05-02-2010, 11:44 AM
Poli-Seal with a polishing pad, followed by Optimum Car Wax.
cobraa
05-02-2010, 02:42 PM
hey guys,

PB polish with sealant doesnt have any abrasive. I prefer something with a bit of cut. Just so I can say that some swirls were polished.