Any tips for restoring paint on John Deere Mower?

[AdrenalineJunky]

Would like to restore the paint on a John Deere riding lawn mower. The paint is heavily swirled and quite dull.

I would like to correct the swirls and restore a glossy finish, if possible.

Currently I have M105,M205, Wolfgang T.Swirl Rem. Orange, white and red pads.

What would be an ideal way to attempt correction?

[AeroCleanse]

Without seeing it, I'd probably start with M105 on an orange pad.

[AdrenalineJunky]

Without seeing it, I'd probably start with M105 on an orange pad.


Now of the three compounds I listed, that is the most aggressive. Correct?

I'm afraid of taking too much paint off, how can I judge this?

[ASPHALT ROCKET]

105 is the most aggressive. You will have to do a test area to see what process to start with. From the sound of the condition of the paint I would start with the orange pad and 105.

[ScottB]

sounds like a great project to play with ... just remember at the end to dress the wheels and wells. (smiles)

[RTexasF]

Can of JD green paint?

[Mike Phillips]

Be sure to get a couple of good before pictures before you start, even before you do your test spot...

See this article,

The power in the after shots is created in the before shots (http://www.autogeekonline.net/forum/tricks-tips-techniques/21216-power-after-shots-created-before-shots.html)


:)

[AV8R]

If this is a real JD and not one of the newer Home Depot JDs, you have some of the best paint you can find and plenty thick.

[AdrenalineJunky]

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0465.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0466.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0467.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0468.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0473.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0469.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0470.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0473.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0474.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0476.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0475.jpg

[Matt]

Oooh I'd love to see the after pics once it's done.

[AV8R]

I believe the hood is injection molded plastic, no? Color is all the way through. My JD looks similar...scratches everywhere. Since I got the GG buffer, I've been eying the mower as another project.

[Mike Phillips]

Great job capturing the before pictures!

IF the hood is injection molded plastic, it might be kind of tricky to buff out... be sure to do your Test Spot on the side to see how it buffs instead of smack dab in the middle of the hood.

Dial in a process, (pad and product combo), that works on the side then tear into the rest of the hood. (Just to be safe)


:)

[Mister B]

Here are a couple pictures of a 50/50 section of the plastic hood on my John Deere riding mower that I buffed out last year. The scratches were really deep. Buffing alone did not do much. I ended up wet sanding the scratches out of the plastic hood with 2000 sand paper and then buffed the hood out with a rotary buffer, Meguiar's Solo Heavy Cutting Wool Pad and M105. After M105, I went over it with M205 on the rotary with a white foam pad.


http://archive.meguiarsonline.com/forums/photopost/data/1406/700_ws2.jpg

http://archive.meguiarsonline.com/forums/photopost/data/1406/700_ws1.jpg

[RaskyR1]

Very cool!

I just picked up a 1992 John Deere STX38 on Sunday for $200 and I plan to buff her out too. The deck needs to be painted on mine though as well as a few other areas I may just spot in. ;)


Can't wait to see the after pics! :props:

[AdrenalineJunky]

This is my first attempt at buffing anything. I was able to restore a gloss finish, but not able to correct 100% of the spider-webbing. Not sure if it was lack of proper technique, or lack of proper products to correct more of the webbing. Overall for it being a working tractor, I am satisfied. I hope when I get to my vehicles they will come out web free. All constructive criticism welcome.

Steps & Products:
1. WASHED
2. CLAYED
3. (7424 XP DA)
4. ORANGE PAD W/M105
5. BLACK PAD W/M205
6. RED PAD W/DP FINISHING SEALANT

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0509.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0511.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0502.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0504.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0505.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0508.jpg

http://i138.photobucket.com/albums/q279/MIKE649/2010/IMG_0510.jpg