A little fun with PB SSR

[Da Fats]

So I have not had many jobs that required paint correction... so I decided to tackle my fathers tundra.... one part at a time of course :).

This was just to figure out how well the paint played with the SSR polishes and to refine my technique with the PCXP... Soon i am going to start using my makita rotary... but I think I'll start on the roof just in case :) and that will be with 105/205 when I get them in.

Feed back is definitely welcome!

Here is an example of the hood before...

http://www.autogeekonline.net/gallery/data/500/SSR_trials_before.JPG (http://www.autogeekonline.net/gallery/showphoto.php/photo/18215)

This was after SSR 2.5 with Orange CCS followed by SSR1 on White CCS and an IPA wipe down.....

http://www.autogeekonline.net/gallery/data/500/SSR_trials_12_.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/18204)

...

http://www.autogeekonline.net/gallery/data/500/SSR_trials_13_.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/18205)

...

http://www.autogeekonline.net/gallery/data/500/SSR_trials_4_.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/18211)

And then with 2 coats of natty's red (That was not my wax int eh cracks... but i do need to clean them up any suggestions?)...

http://www.autogeekonline.net/gallery/data/500/SSR_trials_18_.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/18208)

and the tree shot...

http://www.autogeekonline.net/gallery/data/500/SSR_trials_11_.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/18203)

[Da Fats]

Sorry for the limited angles of the pictures... the sun was low in the sky when I finished up

[budman3]

Very nice!!