How to eliminate some micromarring?

[YankeeFan]

Was working a small test area on a Honda Civic with some mild to medium swirls. Using a Flex on 4 1/2 setting. Using LC orange, white and black pads. Used the folllowing sequence with some final micromarring.

1. Menzerna IP with orange
2. PO106 with white pad
3. Finally MC087 with black pad

Moved the canopy slightly to see that all the swirls and water spots are gone but as I look at differenct angles there is some marring.

Stopped until I can get this solved. How can I do better tomorrow morning?

Thanks,
Howard

[Mike Phillips]

Was working a small test area on a Honda Civic with some mild to medium swirls. Using a Flex on 4 1/2 setting. Using LC orange, white and black pads. Used the folllowing sequence with some final micromarring.

1. Menzerna IP with orange
2. PO106 with white pad
3. Finally MC087 with black pad

Moved the canopy slightly to see that all the swirls and water spots are gone but as I look at differenct angles there is some marring.

Stopped until I can get this solved. How can I do better tomorrow morning?

Thanks,
Howard

Hi Howard,

Somehow this escaped us and no one ever posted any help...

Where you at with this? Did you dial in a process that worked?


:)