klasse aio

[snowking724]

can i layer any sealant over aio or just sealant glaze. would others have a hard time bonding,my gut says they would?

[ScottB]

you can use any pure sealant over AIO ... and dont read to much into the word "glaze" used with their sealant. Its marketing as really no more than a pure sealant of its own. Wolfgang, Four Star, and Duragloss are nice toppers for KAIO.

[j994k]

Lol I was just about to ask almost the same thing! Hope its ok to piggyback my question with yours. After the sealant glaze the bottle says to wait 12 hours for another aplication. Is that 12 hour wait time just for another aplication of Klasse, or is it for anything. I wanted to put Fuzion on over it.The 12 hour wait might kill me.

[ScottB]

Wait 12 hours as possible to allow each coat of the sealant to cure properly. I will say I have topped at less than 8 hours without issue (not scientific and perhaps Fl heat/humidity speeds up process).

[snowking724]

can i layer any sealant over aio or just sealant glaze. would others have a hard time bonding,my gut says they would?

[elk42]

i use the sealant glaze that accompanies the AIO. It looks incredible but do not use too much. the key is to use so little of the product. i also use a straight line direction when applying both products. good luck

[snowking724]

just wasn't sure because the aio says it lays down protection and sealants have a tough time bonding to anything but clean paint. i don't read into the "glaze" thing, just describing the look you get i figured. thanks for the input.

[snowking724]

thanks, i used them together myself before but i was just curious.