Jenn1270
03-07-2010, 04:07 PM
Here are some pics from the weekend. If you read my earlier post, the Dodge was done by my lovable but hardheaded husband.
Local Car wash
Polishing compound
Cleaner wax
PB Trim restorer
http://www.autogeekonline.net/gallery/data/500/medium/IMG_01982.jpg
The Pilot is a work in progress. There are few cobwebs I can find but alot of RIDS induced by the local car wash on the hood mainly. I guess the steel blue metallic on the Honda is quite forgiving
ONRed and clayed last week
This week
MWW (I really liked this stuff)
Dried with OID
After my test spot
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02023.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02013.jpg
I did the rest of the hood with
M105 with a Purple Megs Pad on the PC (after numerous other combos)
Swirl X with a white CCS hand (my arms were killing me after the PC)
Didn't have as good of results with the CCS pads....dunno why.
Covered with Opti-seal for now.
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02033.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02111.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02102.jpg
At the rate I am going, it will probably be the end of the summer before I get the whole car as corrected as I am able.
Local Car wash
Polishing compound
Cleaner wax
PB Trim restorer
http://www.autogeekonline.net/gallery/data/500/medium/IMG_01982.jpg
The Pilot is a work in progress. There are few cobwebs I can find but alot of RIDS induced by the local car wash on the hood mainly. I guess the steel blue metallic on the Honda is quite forgiving
ONRed and clayed last week
This week
MWW (I really liked this stuff)
Dried with OID
After my test spot
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02023.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02013.jpg
I did the rest of the hood with
M105 with a Purple Megs Pad on the PC (after numerous other combos)
Swirl X with a white CCS hand (my arms were killing me after the PC)
Didn't have as good of results with the CCS pads....dunno why.
Covered with Opti-seal for now.
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02033.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02111.jpg
http://www.autogeekonline.net/gallery/data/500/medium/IMG_02102.jpg
At the rate I am going, it will probably be the end of the summer before I get the whole car as corrected as I am able.