Camaro2010
01-02-2010, 07:41 PM
I'm new to this site and read alot about all the products. I have a 2010 camaro, Black on Black and was at the dealer and they thought that were doing me a fravor to polish it up, but instead they put some swirl marks, scratches and I also have some spider webbing. So about a month ago I bought my christmas gift. I was about to order Pinnacle XMT and was advised to go with the Wolfgang Product. Thanks Mike. This is what I bought and the process that I used. Wolfgang Porter Cable 7424XP Swirl - Free Kit 3.0 which included the
Porter Cable 7424XP Polisher
Wolfgang Total Swirl Remover 3.0
Wolfgang Finishing Glaze 3.0
Wolfgang Deep Gloss Paint Sealant 3.0
Wolfgang Deep Gloss Spritz Sealant
1 CCS 6.5 inch Orange Light Cutting Pad
1 CCS 6.5 inch White Polishing Pad
1 CCS 6.5 inch Blue Finessing Pad
addtional items:
1 CCS 4 inch Orange Light Cutting Pad
1 CCS 4 inch White Polishing Pad
1 CCS 4 inch Blue Finessing Pad
Pinnacle Souverän™ Paste Wax (http://www.autogeek.net/pinsouvwax.html)
Wolfgang Elastic Poly Clay Bar 200 Grams (http://www.autogeek.net/wg9000.html)
Autogeek Foam Cannon HP Kit
and alot of Microfiber Towels
My process was the following
1. Wash entire car w/Autogeek Foam Cannon HP Kit
2. Clay the entire car.
3. Wipe down
4. Apply Wolfgang Total Swirl Remover 3.0 w/ Orange Light Cutting Pad
5. Apply Wolfgang Finishing Glaze 3.0 w/ White Polishing Pad
6. Apply Wolfgang Deep Gloss Paint Sealant 3.0 by hand
7. Let sit for 12-hours
8. Apply Pinnacle Souverän™ Paste Wax (http://www.autogeek.net/pinsouvwax.html)by hand.
9. Buffing off wax by hand.
Here are some before and alot of after. Great products. :xyxthumbs: I also included my detail cart that I made.
Porter Cable 7424XP Polisher
Wolfgang Total Swirl Remover 3.0
Wolfgang Finishing Glaze 3.0
Wolfgang Deep Gloss Paint Sealant 3.0
Wolfgang Deep Gloss Spritz Sealant
1 CCS 6.5 inch Orange Light Cutting Pad
1 CCS 6.5 inch White Polishing Pad
1 CCS 6.5 inch Blue Finessing Pad
addtional items:
1 CCS 4 inch Orange Light Cutting Pad
1 CCS 4 inch White Polishing Pad
1 CCS 4 inch Blue Finessing Pad
Pinnacle Souverän™ Paste Wax (http://www.autogeek.net/pinsouvwax.html)
Wolfgang Elastic Poly Clay Bar 200 Grams (http://www.autogeek.net/wg9000.html)
Autogeek Foam Cannon HP Kit
and alot of Microfiber Towels
My process was the following
1. Wash entire car w/Autogeek Foam Cannon HP Kit
2. Clay the entire car.
3. Wipe down
4. Apply Wolfgang Total Swirl Remover 3.0 w/ Orange Light Cutting Pad
5. Apply Wolfgang Finishing Glaze 3.0 w/ White Polishing Pad
6. Apply Wolfgang Deep Gloss Paint Sealant 3.0 by hand
7. Let sit for 12-hours
8. Apply Pinnacle Souverän™ Paste Wax (http://www.autogeek.net/pinsouvwax.html)by hand.
9. Buffing off wax by hand.
Here are some before and alot of after. Great products. :xyxthumbs: I also included my detail cart that I made.