Anyone used LC Flat and Hydro-Tech cutting pads??

[WRAPT C5Z06]

Does the cyan (blue) Hydro Tech have noticeably more cutting power than the LC FLAT orange, or vice versa?

[Z06-Goose]

Does the cyan (blue) Hydro Tech have noticeably more cutting power than the LC FLAT orange, or vice versa?
I love my tangerine and my cyan pads.
The cyan pads have a good bite, and finish great.
The tangerine like the cyan stays pretty firm and also has some good cutting for minor swirls.
I found both pads to achieve any desired results depending upon the compound/polish you use.
These pads have become my favorite pads. That's all I use for my Flex. I love them!

[WRAPT C5Z06]

I love my tangerine and my cyan pads.
The cyan pads have a good bite, and finish great.
The tangerine like the cyan stays pretty firm and also has some good cutting for minor swirls.
I found both pads to achieve any desired results depending upon the compound/polish you use.
These pads have become my favorite pads. That's all I use for my Flex. I love them!
I will be using Griots ROP with 105 w/ cyan hydro pad, then finishing w/ 205 and CCS white pad on my z06. :xyxthumbs:

[Dust2Glory]

Using the Cyan pad with Menz PowerFinish is AMAZING!!! But I used a Makita.

Just know using a RO on your Vette clear coat is going to take a lot of time and patience.

[WRAPT C5Z06]

Just know using a RO on your Vette clear coat is going to take a lot of time and patience.
:(

That's what I'm concerned about. The new Griot's DA is pretty powerful though, so we'll see.

[Rsurfer]

:(

That's what I'm concerned about. The new Griot's DA is pretty powerful though, so we'll see.With 105 using a Griot should not take much...even on a Vette.

[DARK HORSE]

Yes the cc on your vette is very hard. But using 105/205 you'll be fine with the da. Yes it's not going to be as fast as a rotaray, but you'll get nice results pretty quick. Just remember to work a small section at a time approximately 18"x18". May want to consider finishing up with Menz 85rd on a blue LC CCS pad to take the finish to the next level.

[WRAPT C5Z06]

With 105 using a Griot should not take much...even on a Vette.
:xyxthumbs:

I just found this, and this is with the less powerful PC7424XP.

2008 Red Vette...The owner can now sleep at night - Corvette Forum (http://forums.corvetteforum.com/car-care-discussion/2425639-2008-red-vette-the-owner-can-now-sleep-at-night.html)

[WRAPT C5Z06]

Just know using a RO on your Vette clear coat is going to take a lot of time and patience.
Will the Flex make matters any better compared to the Griot's 6"?

[loudog2]

Will the Flex make matters any better compared to the Griot's 6"?
Yes