Tough Decision..... a little help please

[tims04gto]

Im going to be ordering a DA buffer. Im not sure what kit yet and I hear everyone rec the Groits is their a big differance between that and the PC? thanks in advance :confused:

[PAR Detailing]

I have a Megs and my roomate has a PC. I have used both and I personally like the Megs... because its mine haha just kidding... but I feel there is less vibration in the handles and machine. Other than that they work equally as well. I dont know if that helps
Peace
Jon

[HighEndDetail]

Go with the griots. I hear it works real nice and has more power. I have the old PC and plan on getting a griots, to go with my flex 3401

[ScottB]

Griots or Flex ..

[tims04gto]

thanks everyone groits it is!!!!!

[sullysdetailing]

Im going to be ordering a DA buffer. Im not sure what kit yet and I hear everyone rec the Groits is their a big differance between that and the PC? thanks in advance :confused:
The Griot Garage is alot more power full the the PC. The Griot Garage is more like the Flex DA but smaller more compact and easier to use. It is powerfull enougth to power a 6'' pad with is pretty impressive for a DA. Since you are knew to a DA I would recommand the Pinnacle Advance Swirl Remover, Pinnacle Advance Polish, and Pinnacle Liquid Souveran (I believe that is on of the kits) or Wolfgnag 3.0 TSR, Wolfgang 3.0 Finishing glaze, and Wolfgang 3.0 Paint Sealant. These are great kit to start off and learn with. Both kits work very well and are very easy to use.

[loudog2]

I wouldn't compare it to the flex. The flex has forced rotation and more orbital rotations. The orbital path on the griots is 9mm vs. 8mm on the flex. The flex has 3ft more cord alsoa nd a 10 amp motor compared to griots 7 amp motor.


GRIOTS Features:
More Powerful 7-Amp, 850-Watt Motor
2,500 - 6,800 Orbits Per Minute
Variable Speed, Wider RPM Range
Wider 5/16" orbit pattern for faster and better results
Ergonomic Adjustable Handle
More Torque, Better Performance
Longer 10 Foot Power Cord
Backing plate included

FLEX features:
Maximum polishing pad diameter 160 mm or 6.3 inches
10 amp motor
Velcro pad 150 mm or 5.9 inches
Speed without load 160-480 rpm
Orbit (stroke length) 8 mm or 0.31 inches
Orbit rate, without load 3200-9600 rpm
Power input 900 Watt
Power output 590 Watt
Weight 2.60 kg or 5.73
13ft power cord

[tims04gto]

the flex is out of my budget right now im looking at the groits or pc

[tims04gto]

i like that i can use many pad and brush configurations too

[loudog2]

the flex is out of my budget right now im looking at the groits or pc
I know, just didn't want you thinking the flex and griots da's were about the same.

[fubar]

the flex is out of my budget right now im looking at the groits or pc

I have the PC, u can't go wrong with any of those Polishers, just read the spics. for wire size per feet of extion cord. Don't want to burn up that motor.

[sullysdetailing]

I know, just didn't want you thinking the flex and griots da's were about the same.
Groit is the closed thing to the Flex DA. It much more Powerful then the PC

[tims04gto]

well good thing i have till sunday to make up my mind ha ha this site always has me thinking of whats next

[frosty]

tims04gto,

I was in the same boat a week ago. I got the PC XP to save some money but wish I would have went with the flex after doing my car. I'm relative new but have done a lot of research and called product manufacturers to make sure I'm using the right techniques as well as watching the how too's etc.

I was going to send my PC back for the Flex 3401 one and just bite the bullet. However, I decided to keep it for putting on wax and orderd the Flex Lightweight Rotary as I have about the same amout of money in it and the PC as I would just the 3401.

It's interesting about the Griots, I may try to exchange mine for it. One complaint I have about the PC it is vibrates a tremendous amout and seems to be tough on pads. Well at least I went through a pad on my car and asked AG about it and what I was told.

Keep in mind I'm just starting out as well so take it with a grain of salt.

[tims04gto]

hmm all this information..... i have been using a rotary now with no problem but i like to be on the safe side and use a DA. Maybe i will just keep saving and go with the flex......