bmw5541
11-07-2009, 04:48 PM
Hi All,
I have been talking about this for a while now, so I finally completed my full fall detail on my 2006 BMW 33oxi. This was my first time using a pc (http://truthindetailing.com/Forum/autolink.php?id=27&forumid=17&script=showthread), so I was a little nervous
Here is what I did:
*Tires and wheel wells cleaned with Adams APC and car shampoo with brushes.
*Wheels cleaned with P21S (http://truthindetailing.com/Forum/autolink.php?id=26&forumid=17&script=showthread) Gell and various brushes soaked in car shampoo.
*Sprayed car down with ONR at QD strength.
*Washed with ONR (2 bucket w/ Grit Guard).
*Dried w/ leaf blower and WW.
*Clayed w/ ClayMagic Blue Clay and PB S&W as lube.
*IPA wipedown
*Polish with PB SSR2 using orange pad.
*IPA wipedown.
*Finish Polish with Optimum Finishing Polish using green finishing pad.
*IPA wipedown.
*Dressed tires and wheel wells using Megs High Endurance Gel using a foam paint brush.
*Sealed wheels with BFWD x2.
*Sealed paint with BFWD x3 with BF Spray Sealant between coats.
*Cleaned windows w/ SCG Clearly Better Glass
*Sealed windows w/ Optimum OS.
*Dressed trim w/ Black again.
I was only able to get out about 80% of the swirls (the SSR2 didn't have enough cut), but I am very pleased with the way it turned out.
Pics to follow.
Enjoy!
I have been talking about this for a while now, so I finally completed my full fall detail on my 2006 BMW 33oxi. This was my first time using a pc (http://truthindetailing.com/Forum/autolink.php?id=27&forumid=17&script=showthread), so I was a little nervous
Here is what I did:
*Tires and wheel wells cleaned with Adams APC and car shampoo with brushes.
*Wheels cleaned with P21S (http://truthindetailing.com/Forum/autolink.php?id=26&forumid=17&script=showthread) Gell and various brushes soaked in car shampoo.
*Sprayed car down with ONR at QD strength.
*Washed with ONR (2 bucket w/ Grit Guard).
*Dried w/ leaf blower and WW.
*Clayed w/ ClayMagic Blue Clay and PB S&W as lube.
*IPA wipedown
*Polish with PB SSR2 using orange pad.
*IPA wipedown.
*Finish Polish with Optimum Finishing Polish using green finishing pad.
*IPA wipedown.
*Dressed tires and wheel wells using Megs High Endurance Gel using a foam paint brush.
*Sealed wheels with BFWD x2.
*Sealed paint with BFWD x3 with BF Spray Sealant between coats.
*Cleaned windows w/ SCG Clearly Better Glass
*Sealed windows w/ Optimum OS.
*Dressed trim w/ Black again.
I was only able to get out about 80% of the swirls (the SSR2 didn't have enough cut), but I am very pleased with the way it turned out.
Pics to follow.
Enjoy!