What went wrong?

[Irish]

I've been using Klasse AIO for awhile now and I've always had good results. Today I I set out to give my car a fresh coat for winter when this happened:

http://img.photobucket.com/albums/v130/Tired/oops/062.jpg

http://img.photobucket.com/albums/v130/Tired/oops/063.jpg

Pulled it out into the sun to make sure I'd wiped all the residue off. My jaw dropped. I'm at a loss. My hood looks absolutely awful.

Using an LC green, PC on 3.5, CG luber for pad prep. Help!

[loudog2]

Was something stuck in the pad?

[CharlesW]

Are those scratches?
It's hard for me to tell from the pictures, but it almost looks like clearcoat failure.

[Peanut]

It looks like the Klasse AIO was not worked in long enough.
Try applying another coat of the Klasse AIO with your PC but try working it in a little longer and at a faster speed like 5 or 6.

[MoBenzOwner]

What did you use to remove the AIO. Looks like scratches from something in your removal material.

[Lasthope05]

The green pad might have been a bit too much. Give the white a try. Also did you use enough product? Look like marring/pseudo holograming from dry buffing or buffing too long. KAIO is a chemical cleaner so there is no need to "work" the polish in.

[RaskyR1]

Looks like you went to a dry buff with the KAIO. Try applying it by hand to a small section and see how it looks.

[Irish]

Thanks for the feedback guys.

We tried a couple different suggestions, only thing we changed was going with a white pad and using ONR to mist it. Did manage to get the hood fairly cleaned up with m205 on an LC orange. I was freaking out there for a minute.