Got_Leather
10-27-2009, 10:30 PM
First of all, thanks to Eric (Howareb) for helping me out with the class and allowing the use of his BEAUTIFUL shop. We had a great turnout and everyone was able to get hands on and learn a few things. We had some great food and got to meet some great people. Thanks to everyone who attended.
Secondly, I would like to thanks the sponsors of the class who sent out supplies for us to play with during the demonstrations and then at the end of the class, I raffled the supplies off to make sure no one left empty handed. Without our sponsors, this is not possible. So I truly mean it, THANK YOU!!!
The sponsors are as followed.
Megan @ AutoGeek
George @ Detailedimage
Phil @ Detailersdomain
Kevin @ Kleen Car
DaveB @ High Definition
The table of supplies from the sponsors
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober058.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober060.jpg
Note: The clock in the backround, it's nearly 4am and Eric and I were still up from 8am the previous morning. We cleaned the shop, got everything set up and ready for the class that was taking place in 7 hours. With some music jammin, and jokes that weren't funny (although when your that tired, they are hilarious) the time went by and I would do it again if I could.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober062.jpg
The set up area for the class
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober064.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober066.jpg
A closeup of supplies and tools to be used. (The cintas box for safety. Safety first!)
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober067.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober072.jpg
One of our guest, Tom agreed to use his car for the test vehicle. Thanks again buddy!! Before we got started Eric and I were taking turns giving classroom style instructions on proper techniques and products. Then we took a short break, had lunch then got to work.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober074.jpg
We gave Tom, the car owner the first crack at machine polishing.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober079.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober083.jpg
Secondly, I would like to thanks the sponsors of the class who sent out supplies for us to play with during the demonstrations and then at the end of the class, I raffled the supplies off to make sure no one left empty handed. Without our sponsors, this is not possible. So I truly mean it, THANK YOU!!!
The sponsors are as followed.
Megan @ AutoGeek
George @ Detailedimage
Phil @ Detailersdomain
Kevin @ Kleen Car
DaveB @ High Definition
The table of supplies from the sponsors
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober058.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober060.jpg
Note: The clock in the backround, it's nearly 4am and Eric and I were still up from 8am the previous morning. We cleaned the shop, got everything set up and ready for the class that was taking place in 7 hours. With some music jammin, and jokes that weren't funny (although when your that tired, they are hilarious) the time went by and I would do it again if I could.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober062.jpg
The set up area for the class
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober064.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober066.jpg
A closeup of supplies and tools to be used. (The cintas box for safety. Safety first!)
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober067.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober072.jpg
One of our guest, Tom agreed to use his car for the test vehicle. Thanks again buddy!! Before we got started Eric and I were taking turns giving classroom style instructions on proper techniques and products. Then we took a short break, had lunch then got to work.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober074.jpg
We gave Tom, the car owner the first crack at machine polishing.
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober079.jpg
http://i241.photobucket.com/albums/ff161/Bsktballplyr16/LateSeptEarlyOctober083.jpg