PDA

View Full Version : Winter Prep: Big, Blacked-Out and Bad Ass Jeep Wrangler + AutoLavish



jlb85
10-13-2009, 12:20 PM
The owner of this 2007 4-Door Wrangler was refereed to us by a future client ;) The goal was to put on some good protection in prep for winter and, if possible, make it look better in the process.

When we arrived, the Jeep looked intimidating. We expected to have to scrub down the undersides, and brought a few extra bottles of APC, Degreaser, and C.G. Barebones (basically the same stuff as ASD with less smell). The finish was heavily swirled and had significant RIDS all over in random places (off-roading has a way of doing this!). But since it is a Jeep and it is about to be put through winter, we advised against going with a full 2 or 3 step correction, for the time being. A One Step would really liven up the color and make the jeep look great, and would fit within the client's budget better. We will get into this later.

Marc ready to tackle the Jeep:
http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04307.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04310.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04311.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04312.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04318.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04316.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04320.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04314.jpg


Undersides:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04321.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04323.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04326.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04327.jpg


We started by cleaning the undersides using Meg's Degreaser at 4:1 and APC at 4:1 sprayed liberally everywhere we could aim at followed by the black SchMITT and various brushes.

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04336.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04337.jpg

As Marc was crawling under the Jeep, Jacob took care of the wheels. We used C.G. Sticky Wheel Gel at 3:1 and the Daytona Brushes, and APC 4:1 for the tires. One half of one of the front tires was getting hit by direct sunlight while we washed the wheels, and the APC left streak marks no matter how fast we rinsed off the grime. So advice: never use APC on tires that have been heavily dressed before, and never use APC on anything in the sun. The temps on the paint in the sun were 130+F on a 55 F day with the vehicle in the sun for about 10 minutes. We did not check the temps on the tires, and, well, had to work that tire extra hard the rest of the day. We used Griots Rubber Cleaner (and shade) with good results.

After rinsing off the degreasers and wheel cleaners, we foamed the undersides to help neutralize anything left. Shampoo in this case was C.G. Citrus Wash and Clear at about 3:1 dilution in the Foam Cannon.

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04339.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04340.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04341.jpg


...and continued to foam the rest of the vehicle for the first time to loosen the heavy soil:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04346.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04349.jpg


...and rinsed:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04351.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04355.jpg


The Jeep was dryed with the Leaf Blower and a few drying-dedicated waffle-weave MF towels, and taped up for polishing.

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04356.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04357.jpg


As mentioned earlier, the finish was in rough shape. Swirls?:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04313.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04315.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04334.jpg

jlb85
10-13-2009, 12:21 PM
(continued)


So we split up a section of the hood to sample some methods and see what would give the best bang for the buck. On the right side of the picture, we have 3M Ultrafina and pad via rotary. On the left side we have Meg's M105 + 3M Ultrafina (could use an intermediate step with M205). The left looks better, but the right side looked really good too for a quick one-step! We showed this to the owner. He was stoked by both corrections, but going with a Multi-Step polishing would basically double the time and cost of the detail (some wet sanding needed as well). As it looked, we would be able to hook up this Jeep, make it look amazing, and spend more time with sealants, and still come out just under his budget. We advised to wait for Spring to do the full monty, correct any issues that happen in Winter, and clean out the undersides to get al salts off the Jeep. The owner thanked us for not trying to rip him off ;)

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04362.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04363.jpg


We used both the Makita and the Flexcalibur with 3", 4" black LLC pads and the 7" Ultrafina pad. Backing plate was the Yellow Foam 3M Backing plate for the Makita 6 (or 7") backing plate for the Ultrafina pad. Polish was 3M Ultrafina only.

After polishing, we foamed the car one more and used the pressure washer to get rid of any polish residue in the crevices.

LSP was the winning combo from Danase: DWG under Danase Paint Sealant. If you like DWG, you will love the Paint Sealant. Super easy to apply and wipe off, super slick, super wet. We are very pleased with all the Danase products we have tried so far (DWG, DPS, Diamond Tire Gel). The DPS smells different that any sealant we have tried, kinda like toothpaste. Get a bottle and let us know what you think ;)

The underside was dressed with C.G. Barebones. This stuff is really good, and similar to Meg's All Season Dressing. If anything, the barebones has a more pleasant smell, where the Meg's ASD smells stronger and longer. I do not know about longevity comparisons, that will have to wait until I can wash The AutoLavish Detail Rig (done half in ASD and half in Barebones). Tires were dressed with Black Magic Matte Tire Shine, provided by the owner. I love how this stuff looks on big wheels. With nice, shiny wheels,you do not want the tire shine to take away from them. But tires this big need to be dressed as it is hard to achieve an even look without proper dressing.

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04373.jpg


Impressed owner:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04370.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04374.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04375.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04376.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04377.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04378.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04381.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04382.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04383.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04384.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04385.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04387.jpg

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04388.jpg


Bug catcher:

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04389.jpg


What are these guys looking at?

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04392.jpg


Oh! Oh, I see now... killer reflections from a simple One-Step!

http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04394.jpg


I would rock this Jeep anyday!

sullysdetailing
10-13-2009, 04:28 PM
Very nice looks great.

Mike Phillips
10-13-2009, 06:07 PM
Nice work, that thing has a real nice black look to it, almost Mafia style...


:xyxthumbs: