PDA

View Full Version : 1 Step Product?


Pages : [1] 2 3
outlander
10-10-2009, 12:29 PM
Hi guys looking for a 1 step product to apply to my wife 2007 black toyota camry. It has some swirls but not too bad. I have Menzerna IP and FP. But since it is getting cold here in Pittsburgh I"am looking towards a 1 step product followed by a wax. Have A PC with orange, white, black red pads. What do you guys recommend?Feed back please
DLB
10-10-2009, 12:47 PM
I haven't tried it just yet, but I am looking forward to trying the XMT 360. You might want to read some on the forum about - lots of great reviews.

It seems to cover exactly what you are wanting to do, and was made for machine application. The white pad would be perfect.

DLB
loudog2
10-10-2009, 12:59 PM
Power finish 203 on a soft green LC pad works well. So does Wolfgang TSR 3.0. If the swirls are light that will work.
AeroCleanse
10-10-2009, 01:00 PM
Dodo Juice Need For Speed
mixmaster209
10-10-2009, 01:11 PM
Power Finish on Green or White LC pad... nuff said :)
loudog2
10-10-2009, 01:11 PM
I"am looking towards a 1 step product followed by a wax.
Just to make sure. Your looking for a 1-step polish and then wax? Or your looking for a all-in-one product like Dodo need for speed, and XMT 360?
bigmikela
10-10-2009, 01:13 PM
Meguiars Paint Reconditioning Cream D151. Works great. IMO.

Mike
Pats300zx
10-10-2009, 01:36 PM
Dont forget XMT360 :)
ballfan4141
10-10-2009, 01:47 PM
I have been checking out poorboys polish/sealant they have. I am interested in that.
Peanut
10-10-2009, 01:54 PM
The Pinnacle XMT 360 or the Menzerna Super Finish (Nano) fallowed by a carnauba wax. I would recommend the Pinnacle Souveran Paste Wax or the Wolfgang Fuzion Estate Wax for your LSP.
StephenK
10-10-2009, 01:54 PM
have heard some people have gotten a good amount of correction out of M205. and it finishes LSP ready
craigr
10-10-2009, 01:55 PM
Meguiars Paint Reconditioning Cream D151. Works great. IMO.

Mike

:iagree: Great product and my new go to AIO.

Craig
sparkie
10-10-2009, 01:57 PM
PC with orange pad XMT360. It would be faster if you had a yellow pad, it has more cut.
sparkie
10-10-2009, 02:00 PM
Here is a Lexus I used 360 on. It works very nice....
http://www.autogeekonline.net/forum/show-n-shine/20901-09-lexus-rx.html
Before XMT 360
http://i103.photobucket.com/albums/m139/sparkymm6/2009_0927090004.jpg
After XMT 360
http://i103.photobucket.com/albums/m139/sparkymm6/2009_0927090010.jpg
evilwrx
10-10-2009, 04:27 PM
Here is a Lexus I used 360 on. It works very nice....
http://www.autogeekonline.net/forum/show-n-shine/20901-09-lexus-rx.html
Before XMT 360
http://i103.photobucket.com/albums/m139/sparkymm6/2009_0927090004.jpg
After XMT 360
http://i103.photobucket.com/albums/m139/sparkymm6/2009_0927090010.jpg

That looks great!! What pad did you use to obtain these results? Did you finish this with an lsp or just use XMT360 as it is a sealant?

I have used XMT 360 with a white pad and it finished out great.