TheGLL
09-26-2009, 08:56 PM
Hi,
I bought Menzerna products with a PC7424XP and I would like to know if my "recipe" and technique looks good :
1- Menzerna PO91E with orange or white CCS 6.5" pads, speed 5-6.
2- Menzerna PO85U with grey CCS 6.5" pads, speed 5.
3- Meguiars Canurba wax applied by hand.
Eventually I want to buy smaller pad.
I also bought a Poorboys EX Sealant with Carnauba, but I didn't receive it yet.
So after a lot of reading, here on the forum, here the pictures of a friend's work truck ( so a lot of swirls ) :
Before:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1579.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1581.JPG
The hood before:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1583.JPG
The hood after PO91E ( only the right side is done ) :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1592.JPG
Still the hood after PO91E :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1596.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1597.JPG
A door after PO91E and PO85U ( only the left side is done ) :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1609.JPG
Left side after PO91E and PO85U :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1599.JPG
The finish look:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1630.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1635.JPG
I have few questions for you guys :
I only have 1 orange pad and after maybe half of the car, the pad was starting to make more dust and it wasn't working like it was at the begining ... is it because the pad was too dirty ?
Is there better/other products that I could use for that kind of work ( most of the time I'll do basic detailing like I did today )?
Feel free to give me tips or comments.
Thanks! :)
I bought Menzerna products with a PC7424XP and I would like to know if my "recipe" and technique looks good :
1- Menzerna PO91E with orange or white CCS 6.5" pads, speed 5-6.
2- Menzerna PO85U with grey CCS 6.5" pads, speed 5.
3- Meguiars Canurba wax applied by hand.
Eventually I want to buy smaller pad.
I also bought a Poorboys EX Sealant with Carnauba, but I didn't receive it yet.
So after a lot of reading, here on the forum, here the pictures of a friend's work truck ( so a lot of swirls ) :
Before:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1579.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1581.JPG
The hood before:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1583.JPG
The hood after PO91E ( only the right side is done ) :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1592.JPG
Still the hood after PO91E :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1596.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1597.JPG
A door after PO91E and PO85U ( only the left side is done ) :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1609.JPG
Left side after PO91E and PO85U :
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1599.JPG
The finish look:
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1630.JPG
http://photos.gllstuff.com/Polissage/DL%20-%2026%20Sept%202009/IMG_1635.JPG
I have few questions for you guys :
I only have 1 orange pad and after maybe half of the car, the pad was starting to make more dust and it wasn't working like it was at the begining ... is it because the pad was too dirty ?
Is there better/other products that I could use for that kind of work ( most of the time I'll do basic detailing like I did today )?
Feel free to give me tips or comments.
Thanks! :)