Modded cars

[BlackSunshine01]

i have noticed that alot of us detailers have nice sports cars. any body like to tweak on them? i personally have a 01 mustang gt with some minor stuff done to it. 2"drop, kyb shocks struts, maximun motorsports full length sub frame connectors, 03 cobra wheels, tinted head and tail lamps, crystal clear fog lamps, hid conversion. what do you guys have?

[corolla619]

05 corolla xrs, ksport coilovers, hotchkiss f/r sway bars, dc sports front strut bar, alutec rear strut bar, summit racing front and rear chassis braces, carbon fiber hood/trunk/rear window spoiler and grille, projector headlights, 8k hid lows/8k hid fogs/vuteq front/rear lip(discontinued)2 sets of 2 piece forged wheels, brembo drilled rotors f/r, brembo 8 piston calipers front and 4 piston brembos rear. custom 3 piece harness bar w/aerospeed 4 point harnesses, twm short throw shifter,cable and base bushings, custom aluminum crush bent 3 inch exhaust, adjustable racing pedals, digital tach w/shift light(stewart warner) glow shift gauges. aem cold air intake, hydra ems, aerospeed grounding kit, greddy supercharger. jet dyno'd at 308 whp. stock was 174 whp.

[BlackSunshine01]

^damn!did you have to go into the bottom end to support the extra power of the charger? your pumpin out more ponies than me:awman:

[HHIslander]

i had a lot done to my BMW in my signature.. and then...
http://img.photobucket.com/albums/v244/shoeislande46/n12608846_31566708_5911.jpg


this is where the truck hit me on the side and caused me to crash...
http://img.photobucket.com/albums/v244/shoeislande46/n12608846_31566709_6286.jpg

[Ryan]

05 corolla xrs, ksport coilovers, hotchkiss f/r sway bars, dc sports front strut bar, alutec rear strut bar, summit racing front and rear chassis braces, carbon fiber hood/trunk/rear window spoiler and grille, projector headlights, 8k hid lows/8k hid fogs/vuteq front/rear lip(discontinued)2 sets of 2 piece forged wheels, brembo drilled rotors f/r, BREMBO 8 piston calipers front and 4 piston BREMBO rear. custom 3 piece harness bar w/aerospeed 4 point harnesses, twm short throw shifter,cable and base bushings, custom aluminum crush bent 3 inch exhaust, adjustable racing pedals, digital tach w/shift light(stewart warner) glow shift gauges. aem cold air intake, hydra ems, aerospeed grounding kit, greddy supercharger. jet dyno'd at 308 whp. stock was 174 whp.


Can you post a pic of your Brembo 8 piston front calipers?

[keifer75]

2007 Obsidian black pearl Subaru Wrx TR. turbo back turbo xs exhaust, progress drop springs, 17 inch gold rota rev wheels w/ falken 452's, vf39 turbo, alpine type s door speakers all around, 12 inch jl w6 in custom molded box.

[dublifecrisis]

lightly modded 07 GTI - REVO Stage 1 software (chip), neuspeed intake.

[r0ckstrWS6]

00 pontiac trans am ws.6 package. 5.7 litre V8 LS1.

koni4/4 shocks, Strano lowering springs, Corsa exhaust, Kooks long tube headers, custom Y-pipe, underdrive pulleys, LS6 Intake Manifold,

just basic bolt ons. dyno'd 350RWHP 350RWTRQ

(picture taken before suspension was installed)
http://www.fquick.com/images/vehicles/full/3697126217.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=126217)

[Gary Sword]

Can you post a pic of your Brembo 8 piston front calipers?

Here's a pics of 8 piston Brembo's from one of my cars:
http://www.autogeekonline.net/gallery/data/500/Gallardo_FrontWheel.jpg

[Mirror Detailing]

Well I had this...

2003 Mustang GT - Pro5.0 Shifter, O/R X-Pipe, Custom Turn Down Exhaust, Intake, Plenium, Throttle Body, Pulleys, Eibach Springs, and American Racing Rebel Rims.

http://img41.imageshack.us/img41/7408/blackmustang.jpg (http://img41.imageshack.us/i/blackmustang.jpg/)

Then sold that for this which I did even more to...

2003 Mach 1 - Spec Steel FLywheel, Spec Stage 2 Clutch, Pro5.0 Shifter, MAC Longtubes, MAC O/R Prochamber X-Pipe, Magnaflow Magnapack Exhaust, C&L Intake, MAF, K&N Intake, Ported Intake Manifold, 1/2 Intake Spacer, Forged Flat Top Pistons, Forged H-Beam Rods, Forged Knife Edged Crank, Block Bored .010 Over, Tokico Gas Struts, and Eibach Springs, Nitto 555r's 315/35/17's!

Then one hell of a crappy tune making 315/335 at the ground.

http://img5.imageshack.us/img5/7259/machlighting.jpg (http://img5.imageshack.us/i/machlighting.jpg/)

[Jokeman]

Just a pickup that looks stock. 2002 Silverado with a swapped in a 6 liter lq9 with edelbrock heads, comp cam, 42lb injectors, headers, yank 3000 stall, flt level 5 4l65e trans. Tuning done with HPTuners.

Interior stuff, interior was stripped and 2 layers of raam mat sound deadening put everywhere. Inside all panels were painted with eDead v3. Sound system has an Alpine ida-x305 with 80gig ipod, two kicker amps, Phoenix Gold RSd65cs components and 4 Elemantal Designs EU700.

Exterior was basic, tahoe grilll, clear corner lamps, 05 silverado tail lights, and 08 silverado z71 wheels.

I think that is most of what was done.

Here is a picture of it loaded up to go snowmobiling.
http://www.essexcountymotorsports.com/Pictures/Sled/SledTrips/Dec21/loadedup.jpg

[acc1079]

My DD and the pic for my avatar:
2007 Toyota Tundra
5.7 with TRD supercharger - 504hp
Corsa SS Exhaust with custom routing through rollpan and tip
2/4.5 tundra racing lowering kit
TRD Sway bar
Forgetec 22" prototype wheels with nitto 420S tires
Roll pan
Pioneer AVIC Z3 with 60GB hard drive and ipod controller
Polk 6501db in front/back doors
fosgate 25tolife 1000w 5 channel amp
Stealthbox with JL 8w7
Black headlight mod
Painted grill surround, mirrors, and bug shield
Changed all LED gauge lighting to white


my toy truck
1995 Dodge 1-ton dually
To much stuff to mention, but highlights are:
Custom injection pump
twin turbo's
still able to pull equipment with it, and race it, all at the same time.

Here is a video after it dyno'd over 500 rwhp and over 1000ftlb tq
[ame=http://www.youtube.com/watch?v=UNf6MreSZyQ]YouTube - Dodge Dually Burnout after Dyno Run[/video]

It is so fun to suprise people with!! :D

[wytstang]

95 Mootang gt 302
Cobra intake, Equal length headers, Steeda Superlite Springs, Tokico S/S, 03 Cobra front lower control arms. Waiting to be installed Cobra front brake kit, MM adjustable lower control arms, and MM C/C plates. Also soon I'll be redoing the exhaust, switching over to long tubes(coated)/pro chamber mid pipe and probably Magnaflow cat-back. Favorite mod to date 03 cobra seats. :props:
http://img190.imageshack.us/img190/7601/img0060medium.jpg
http://img190.imageshack.us/img190/9266/img0052medium.jpg

[Mirror Detailing]

nice wystang...you need to do a black rear seat delete, that would make that interior perfect!

Also MAC Lt's, mac prochamber x-pipe and a magnapack exhaust is a beautiful combo!

[BlackSunshine01]

i had a lot done to my BMW in my signature.. and then...



this is where the truck hit me on the side and caused me to crash...


damn that sux, what model and what were the mods?


00 pontiac trans am ws.6 package. 5.7 litre V8 LS1.

koni4/4 shocks, Strano lowering springs, Corsa exhaust, Kooks long tube headers, custom Y-pipe, underdrive pulleys, LS6 Intake Manifold,

just basic bolt ons. dyno'd 350RWHP 350RWTRQ

(picture taken before suspension was installed)


kooks and corsa sound awesome on the lsx motors!


Well I had this...

2003 Mustang GT - Pro5.0 Shifter, O/R X-Pipe, Custom Turn Down Exhaust, Intake, Plenium, Throttle Body, Pulleys, Eibach Springs, and American Racing Rebel Rims.



Then sold that for this which I did even more to...

2003 Mach 1 - Spec Steel FLywheel, Spec Stage 2 Clutch, Pro5.0 Shifter, MAC Longtubes, MAC O/R Prochamber X-Pipe, Magnaflow Magnapack Exhaust, C&L Intake, MAF, K&N Intake, Ported Intake Manifold, 1/2 Intake Spacer, Forged Flat Top Pistons, Forged H-Beam Rods, Forged Knife Edged Crank, Block Bored .010 Over, Tokico Gas Struts, and Eibach Springs, Nitto 555r's 315/35/17's!

Then one hell of a crappy tune making 315/335 at the ground.



i want to sell my gt and get a mach


My DD and the pic for my avatar:
2007 Toyota Tundra
5.7 with TRD supercharger - 504hp
Corsa SS Exhaust with custom routing through rollpan and tip
2/4.5 tundra racing lowering kit
TRD Sway bar
Forgetec 22" prototype wheels with nitto 420S tires
Roll pan
Pioneer AVIC Z3 with 60GB hard drive and ipod controller
Polk 6501db in front/back doors
fosgate 25tolife 1000w 5 channel amp
Stealthbox with JL 8w7
Black headlight mod
Painted grill surround, mirrors, and bug shield
Changed all LED gauge lighting to white


my toy truck
1995 Dodge 1-ton dually
To much stuff to mention, but highlights are:
Custom injection pump
twin turbo's
still able to pull equipment with it, and race it, all at the same time.

Here is a video after it dyno'd over 500 rwhp and over 1000ftlb tq
- Dodge Dually Burnout after Dyno Run ("http://www.youtube.com/watch?v=UNf6MreSZyQ)

It is so fun to suprise people with!! :D
those are both serious rides!


95 Mootang gt 302
Cobra intake, Equal length headers, Steeda Superlite Springs, Tokico S/S, 03 Cobra front lower control arms. Waiting to be installed Cobra front brake kit, MM adjustable lower control arms, and MM C/C plates. Also soon I'll be redoing the exhaust, switching over to long tubes(coated)/pro chamber mid pipe and probably Magnaflow cat-back. Favorite mod to date 03 cobra seats. :props:


i want to put some racing style seats in mine. i feel like i slide all over the place after i detail the car and start beatin on it. i really do like the 03/04 seats as well.

KEEP EM COMING GUYS!