Bonding issues with second coat of DGPS - Quick deatiler?

[alowe]

Hey all,

I have 1 coat of DGPS curing on a vehicle (garaged). In the morning, a second coat will be applied. Question is, will I encounter any bonding issues if I use Wolfgang's Instant Detail Spritz to clear off any dust that may have accumulated?

That night a coat of Fuzion will be applied before the customer picks up...

Thanks all,

Andrew

[TheDodgeGuy]

You will be just fine. Let us know how it turns out :xyxthumbs:

[Mike Phillips]

I've never walked out into the garage the next day and seen a coat of wax that had slipped off the car and piled up on the floor surrounding the car due to a bonding issue.

:)

[alowe]

Thanks guys. Normally I will rewash the car, but do not have time in this morning. Second coat is curing for an hour, then wiping off. Wolfgangs QD worked very well. Nice and clean easy on and off, little buffing was required and spritzed well from bottle, covered a large area with one squeeze.

[ScottB]

Most if not all of the Wolfgang line is designed to work well in unison. The spray should have no issues between levels of the sealants.

[alowe]

Most if not all of the Wolfgang line is designed to work well in unison. The spray should have no issues between levels of the sealants.


Thanks mate!