Wolfgang DGPS Coating Question

[Mirror Detailing]

I see everyone say 12 hours between each coat, but my question is do you put it on and then LEAVE that first coat sitting on the car for 12 hours or put on wipe off then let the paint sit then 12 hours later put another coat on?

[smalltrees]

If you visit the store, and see the product description, you will see this...


Directions:
1. Wash your vehicle using Wolfgang Auto Bathe (http://www.autogeek.net/wg1000.html) or your favorite shampoo. Dry completely.
2. For the best results, use a paint cleanser like Wolfgang Paintwork Polish Enhancer (http://www.autogeek.net/wg2000.html) to remove mild imperfections and wax build-up.
3. Apply Wolfgang Deep Gloss Paint Sealant 3.0 over the entire vehicle either by hand or with a machine. If applying by hand, use a yellow foam applicator. If applying by machine, use a blue finessing pad. Using a dual action polisher, set the maximum speed to 4.5 and work in overlapping sections until the entire vehicle is covered. Apply a very thin, even coat.
4. Once the vehicle is covered, wait 30-45 minutes before buffing off the sealant. Use a microfiber towel or a microfiber bonnet on your polisher.
5. This product is moisture-sensitive. In order to achieve a slick, durable finish, Wolfgang Deep Gloss Paint Sealant 3.0 must cure for at least 12 hours before being exposed to moisture. Do not apply sealant before dusk because dew will interfere with the adhesion to the paint. Park your vehicle in a garage or under a shelter while it is curing, if possible.

[Mirror Detailing]

If you visit the store, and see the product description, you will see this...


Directions:
1. Wash your vehicle using Wolfgang Auto Bathe (http://www.autogeek.net/wg1000.html) or your favorite shampoo. Dry completely.
2. For the best results, use a paint cleanser like Wolfgang Paintwork Polish Enhancer (http://www.autogeek.net/wg2000.html) to remove mild imperfections and wax build-up.
3. Apply Wolfgang Deep Gloss Paint Sealant 3.0 over the entire vehicle either by hand or with a machine. If applying by hand, use a yellow foam applicator. If applying by machine, use a blue finessing pad. Using a dual action polisher, set the maximum speed to 4.5 and work in overlapping sections until the entire vehicle is covered. Apply a very thin, even coat.
4. Once the vehicle is covered, wait 30-45 minutes before buffing off the sealant. Use a microfiber towel or a microfiber bonnet on your polisher.
5. This product is moisture-sensitive. In order to achieve a slick, durable finish, Wolfgang Deep Gloss Paint Sealant 3.0 must cure for at least 12 hours before being exposed to moisture. Do not apply sealant before dusk because dew will interfere with the adhesion to the paint. Park your vehicle in a garage or under a shelter while it is curing, if possible.

Okay I saw that, but it throws me off when it says 12 hours between coats! So after 30-45 of it sitting dirrectly of the paint, then buff off, and have nothing else on the car for 12 hours? I thought I had seem some say leave it on for up to 12 hours!

Thanks for the info!

[wytstang]

Correct. buff off after 35/45 minutes then wait 12/24 hrs for the next coat to be applied.

[Mirror Detailing]

Correct. buff off after 35/45 minutes then wait 12/24 hrs for the next coat to be applied.

awesome thanks! :buffing: