Duragloss: DG101 DG105 DG601

[kenzo42]

Where does the bonding agen DG601 fall into all of this?

Do you use the pre-cleaner (101), then bond (601), then seal (105)?

Or bond first? I think my sequence is wrong.

[dublifecrisis]

I believe so. The 101 doesn't have any sealant in it right? I think I'm confusing that with #111? I use 105 a bit but I never did the PBA before 105. I have heard good things though : )

[ryandamartini]

Where does the bonding agen DG601 fall into all of this?

Do you use the pre-cleaner (101), then bond (601), then seal (105)?

Or bond first? I think my sequence is wrong.

#101 is a cleaner wax/sealant.

#601 is applied first then you put on 105 or 101. I personally LOVE 105. :)

[Lowprofile]

the 601 then apply the 105 on top of the 601. Do not wipe off 601. You let it sit for 45 minutes than apply the 105. I also love the 105. :iagree:

[ryandamartini]

the 601 then apply the 105 on top of the 601. Do not wipe off 601. You let it sit for 45 minutes than apply the 105. I also love the 105. :iagree:

Thanks for the clarification. I forgot that detail.

[sal329]

I would skip 101, if you wanna clean either a pure polish or DG 501 buff off just like you would a polish do not give it time to haze, then apply 601 then 105 and buff off using AW