2006 Yellow Jeep Wrangler

[HMFIC]

Washed: DP Extreme Foam, Foam Gun, Rinse bucket w/Grit Guard and Sheep Skin Mitt

Clay: Started w/ Pinnacle and quickly switched to the more aggressive DP

Polish: SIP w/ orange CCS pad on hood and top of fenders. Did the rest of the car, and hood again, with green CCS pad. Finished with gold kompressor pad and WG finishing glaze.

Sealed: Fuzion

Tire/Wheels, wheel wells, fender flares: cleaned and dressed with DP(FreeeeeBeee) Damn I miss Monster Garadge

http://i556.photobucket.com/albums/ss5/HMFIC/1b.jpg
Seemed like everyone did the foam shot so I turned the gun up to High for the occasion
http://i556.photobucket.com/albums/ss5/HMFIC/4b.jpg
After 1/4 of the hood
http://i556.photobucket.com/albums/ss5/HMFIC/clay.jpg
After wash clay and tape
http://i556.photobucket.com/albums/ss5/HMFIC/100_0038.jpg
50/50 Forgive my noobness with a camera
http://i556.photobucket.com/albums/ss5/HMFIC/5050b.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/5050a.jpg


Some Before and After

Hood
http://i556.photobucket.com/albums/ss5/HMFIC/hoodb.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/hooda.jpg
Side
http://i556.photobucket.com/albums/ss5/HMFIC/100_0037.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/100_0046.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/100_0047.jpg

http://i556.photobucket.com/albums/ss5/HMFIC/2b.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/2a.jpg

http://i556.photobucket.com/albums/ss5/HMFIC/1b.jpg
http://i556.photobucket.com/albums/ss5/HMFIC/1a.jpg


I promise I will take better pics in the future. this was my 1st time taking picture of my work.

Thanks for looking

[HMFIC]

http://i556.photobucket.com/albums/ss5/HMFIC/100_0050.jpg

Opps forgot one. Man its a lot of work to get picture up. Had to transfer pics to photobucket then get links to put here. Took me almost an hour LOL.

[Meghan]

You did a great job, you can always upload the pictures to the gallery here and you the link to post them in your thread.

[Harleyguy]

Looks great did i miss something or did you post it? After the SIP on orange did you use the SIP again on the green pad or another 106fa or 85rd ??

[Gary Sword]

Very Nice! A Jeep is a PITA to detail.

[Jimmie]

Good work on that paint. The Jeep looks great. Also, the vinyl trim looks better than I see on most Wranglers. What did you use on it?

Sorry for the ??? I think I found it. DP Protectant.

[supercharged]

that a cute looking Jeep, I tell you! I love that yellow!!!

[HMFIC]

Looks great did i miss something or did you post it? After the SIP on orange did you use the SIP again on the green pad or another 106fa or 85rd ??

SIP again with green then followed with WGFG with a gold kompressor pad.


Should I have done something different? The green pad finished to a nice gloss. I am still trying to learn the new products

Please! feel free to criticize my work or I will never know or will take me longer to figure out what i do wrong


Thanks Gordon

[HMFIC]

Good work on that paint. The Jeep looks great. Also, the vinyl trim looks better than I see on most Wranglers. What did you use on it?

Sorry for the ??? I think I found it. DP Protectant.

DP Gloss tire gel then used a cheapo micro fiber to get off all excess. I love this stuff. A little goes a long way.


I was only supposed to correct the paint but it looked like #### with out the wheel wells and trim done. I even degreased the engine and the bottom of the hood which was almost black. Damn my OCD!

[HMFIC]

Very Nice! A Jeep is a PITA to detail.

Yeah. So many little things to take off and put back on again. Tail lights, blinkers, windshield tie down, windshield whipers, hood latches, and rubber stopper for hood. And license plate assembly

[HMFIC]

This is the second car i have done since getting the new products I used here.

[Harleyguy]

SIP again with green then followed with WGFG with a gold kompressor pad.


Should I have done something different? The green pad finished to a nice gloss. I am still trying to learn the new products

Please! feel free to criticize my work or I will never know or will take me longer to figure out what i do wrong


Thanks GordonNo problem pick up some 106FA finish down with that on a gray pad .It should make it pop even more.Sip isn't the most aggressive compare to megs 105 but it Sip cuts for sure so you should follow up with a less aggressive polish just like you do with your pads.Since you had to go over the truck twice anyway 106fa finishes down really nice.If you like drop me a PM can give you some to try if you like:cheers:

[jugodegolf]

digging the yellow. nice job.

[loudog2]

No problem pick up some 106FA finish down with that on a gray pad .It should make it pop even more.Sip isn't the most aggressive compare to megs 105 but it Sip cuts for sure so you should follow up with a less aggressive polish just like you do with your pads.Since you had to go over the truck twice anyway 106fa finishes down really nice.If you like drop me a PM can give you some to try if you like:cheers:
Adam, remember wolfgang finishing glaze is basically 106FA. It is not a true glaze, and is a nano polish.:cheers:

[07ImpalaSS]

Looks really good.