PDA

View Full Version : polishing after paint job



tonyspop
05-23-2009, 05:09 PM
Hello everyone,been a while since I last posted.My wifes 2003 Honda Accord was rear ended a couple of months ago.GRRRRRRRRRRRRRRR.Anywho,body work was performed,new hood,trunk and back bumper.Question is,how long does clearcoat have to cure before I'm able to polish?I know I can wax but I want to polish.Dealer did nice work but their detailer needs to take buffer 101:D.Any input would be welcome.Thanks in advance.Feed back please

loudog2
05-23-2009, 05:14 PM
60-90 days is usually the norm.. It is better to error on the side of caution.

The Skillmaster
05-23-2009, 07:58 PM
You can polish right away but you need to wait 60 to 90 days before putting on any kind of protection because the paint needs to out-gas. Warmer weather will make this go faster. If you wax or seal it to soon, it can cause the paint to bubble.

eyecandy
05-23-2009, 11:36 PM
Just like the others said 60-90 days depending on weather for sealant or wax. However if you need to do any polishing, wetsanding/leveling its best to do that after the specified time which is normally 12-24hrs because the longer you wait the harder the clear coat gets.

tonyspop
05-28-2009, 12:50 PM
Thanks for the replies,I will waithttp://www.autogeekonline.net/forum/images/icons/icon10.gif