PDA

View Full Version : meguiars #7 polish


02nissanISR
05-23-2009, 06:51 AM
Anyone have any experience using megs #7 polish w/pc if so what did you do ie speed settings, how did you work it in, etc. I tried it yesterday and I didn't have any problems but I'm not sure if I got the most out of it. I set the pc to 3-4 and just worked it in a fairly quick manner then wiped it off. As your not supposed to let it dry, I didn't think the slower method would work. Thanks for any advice.
ScottB
05-23-2009, 07:52 AM
Isnt Megs 7 a Showcar Glaze ?? If so, no polishing properties and can be added by machine or hand. Removal by towel is preferred.
02nissanISR
05-23-2009, 11:37 AM
Thanks. Upon further research I now know the difference between a polish and a glaze. Any suggestions on polish there are so many choices. I prefer to use the pc to apply if that makes a difference.
CakeDaddy
05-23-2009, 12:20 PM
Thanks. Upon further research I now know the difference between a polish and a glaze. Any suggestions on polish there are so many choices. I prefer to use the pc to apply if that makes a difference.


what is the color of your car and mfg?
02nissanISR
05-23-2009, 01:09 PM
2002 maxima light colored I think they call it sunlit sand or something
ScottB
05-23-2009, 06:43 PM
Thanks. Upon further research I now know the difference between a polish and a glaze. Any suggestions on polish there are so many choices. I prefer to use the pc to apply if that makes a difference.


Menzerna Polishes ...with the new 16 ounce versions I would pickup PowerFINISH and Nano polish . Nissan paint is quite easy to repair based upon my uses.
Rsurfer
05-23-2009, 06:55 PM
Menzerna Polishes ...with the new 16 ounce versions I would pickup PowerFINISH and Nano polish . Nissan paint is quite easy to repair based upon my uses.
:iagree::whs:What size pads are you using for the pc?
02nissanISR
05-23-2009, 06:59 PM
I've heard good things about menzerna are these good across the board as far as different paints (japanese, german) so on.
also i am using ccs smart pads 6.5 in
Rsurfer
05-23-2009, 07:05 PM
I've heard good things about menzerna are these good across the board as far as different paints (japanese, german) so on.
also i am using ccs smart pads 6.5 inYou need some 5.5" pads. The 6.5" pads are too big for the pc to handle. It won't cut butter. For heavier correction get some 4" pads.:buffing:
02nissanISR
05-23-2009, 07:16 PM
i was actually considering that for the simple reason that the pc comes set up for 5.5 in pads (5 in. backing plate,5 in. counter weight) and the pc doesn't seem to run as smooth with the 6.5 in. pads. but thats what the kit came with you know
michael k
05-23-2009, 07:22 PM
O2
Does your nissan have the little sticker under the hood by drivers fender stating it has a hard Clear Coat?

Just curious.Im the MAN
02nissanISR
05-23-2009, 07:27 PM
no such sticker. but here is an off topic question: can anyone tell me how to get a pic of my car up as my icon
michael k
05-23-2009, 07:39 PM
Top of the page, under the red banner,on the left. Click user Cp then click edit Avatar.
Tesla
05-23-2009, 08:32 PM
M205 with 4" LC Flat Pad on your PC.