View Full Version : Fusion over a sealant
bob m
05-21-2009, 06:41 AM
I posted this in the Wolfgang products forum, but figured I'd post it here too.
Got a new black Audi, clayed it and put a couple of coats of a good (not Wolfang's) sealant on. Can I apply Fusion over that or must I remove the sealant?
Bob
termigator
05-21-2009, 07:30 AM
Fuzion will be fine on top of any sealant. There shouldn't be any compatibility issues, if that's what you're concerned with.
loudog2
05-21-2009, 08:12 AM
You can apply it over your sealant. Just make sure it is 12-24 hours after you apply your sealant.
Emile
05-21-2009, 08:17 AM
Yeah, since Fuzion has no cleaners, you can layer it just fine on top of any sealant. What sealant did you use?
bob m
05-21-2009, 08:53 AM
THANKS GUYS! I used BlackFire Wet Diamond.
Bob
termigator
05-21-2009, 09:39 AM
THANKS GUYS! I used BlackFire Wet Diamond.
Bob
That's good stuff. It's one of my favorite sealants.:cheers:
ScottB
05-21-2009, 06:09 PM
Fuzion adds a noticable difference in wetness and depth over most sealants. Add in the sealants reflective nature and a win-win.
bob m
05-21-2009, 08:18 PM
I have put Fusion on most of the car and I must say I am very impressed; goes on easy and comes off easy and the look is incredible. Real life; how much protection does this afford (non garaged car)?
Bob
bukxanger
05-21-2009, 08:33 PM
do you have to wash the car before you put on fusion? since you have to wait 12-24hrs, or can you qd w/ mf towel? or is there another trick?
bob m
05-21-2009, 10:39 PM
do you have to wash the car before you put on fusion? since you have to wait 12-24hrs, or can you qd w/ mf towel? or is there another trick?
As long as the car isn't tooo dirty, I just qd with microfiber towel and was good to go.
Bob
ScottB
05-23-2009, 08:02 AM
I have put Fusion on most of the car and I must say I am very impressed; goes on easy and comes off easy and the look is incredible. Real life; how much protection does this afford (non garaged car)?
Bob
the Wolfgang and Pinnacle products are so much easier to use than most "other" products. It becomes a win-win with initial use and later when you want to toss on a quick coat.
Tesla
05-26-2009, 08:08 AM
THANKS GUYS! I used BlackFire Wet Diamond.
Bob
How did you like the Wet Diamond?
bob m
05-26-2009, 01:15 PM
How did you like the Wet Diamond?
I do like it; like the Fusion; goes on easy and the finish is deep, at least compared to the KLASSE, which is really my only frame of reference.
Bob
Tesla
05-26-2009, 02:14 PM
I do like it; like the Fusion; goes on easy and the finish is deep, at least compared to the KLASSE, which is really my only frame of reference.
Bob
I'm reading that more and more.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.