PDA

View Full Version : Pinnicle Bodyworks Shampoo


loudog2
05-19-2009, 08:01 PM
Will it strip a LSP if you use too much? Kinda like chemical guys citrus wash. One once to wash, two onces to strip. Just curious. Also, what about DP auto bath?
Emile
05-19-2009, 08:16 PM
You would have to use a damn lot of soap to strip the wax with a car wash soap that is designed to be gentle on your wax.
loudog2
05-19-2009, 08:33 PM
I used the the frozen fuzion on my girlfriends car last weekend. I washed it Friday night, then on Saturday morning I used some wolfgang detail spritz on it. I had a hard time dragging the towel across the paint. I know the fuzion went on a little oily and looked a little different. I just thought I might have used too much shampoo in the bucket.

I remember reading over on autopia that someone said it stripped there pinnicle wax off. Posts #17
Sealant wearing off after one wash? - Page 2 - Autopia.org (http://www.autopia.org/forum/car-detailing/118192-sealant-wearing-off-after-one-wash-2.html)

It didn't effect my car with the RBOE on it.
Joshs2013MSAltimaSL
05-19-2009, 09:14 PM
You know...it might just do that if you use too much. It would make sense ya know? Is there anything on the label that says x amount of soap for this, and x amount of soap for that?
ScottB
05-20-2009, 05:45 PM
I consider this wash one of the lightest available, only P21S seems lighter. Waxes are clearly safe with either ...
Jimmie
05-20-2009, 06:40 PM
The only ones that I've heard that will readily strip are strong solutions of citrus wash; NXT wash; and Dawn.
SWIRLCHAOS
05-20-2009, 09:06 PM
hello. i used pinnacle's car wash for the first time and i was amazed. two capfuls for about 2 gallons of hard water :( (gonna get the filter set-up soon). the car dried easy and effortlessly. heres a pic next day of the car washed.
loudog2
05-20-2009, 09:18 PM
Don't get me wrong here!! I love that shampoo. I was just wondering if using too much, like citrus wash, would strip a LSP.
ASPHALT ROCKET
05-20-2009, 09:30 PM
Lou, it will strip wax if you use too much.
loudog2
05-20-2009, 09:49 PM
Thanks Dana. It says a 1 ounce for 2-3 gallons. But it doesn't seem slick enough. Would 2-3 ounces be too much for 3 gallons?
ASPHALT ROCKET
05-20-2009, 10:30 PM
You are asking someone that never measures out soap.:D
nrengle
05-21-2009, 02:02 AM
If it states a 1 to 3 ratio, and your going 1 to 1, it's probably gonna do some removal of your LSP. Maybe not entirely, but I'd suspect it will strip wax at that ratio.
Showroom Shine
05-21-2009, 05:29 AM
I used this product yesterday in my cannon. It smelled great and did a spectacular job. I think you would have to use alot to strip your wax.