christian900se
04-28-2009, 09:25 PM
Ive been wondering for a while whether I could use the usual polishes and pads with my PC on glass to clean up minor water spots, haze and wiper trails (minor).
My thoughts were if I used a ccs white pad with Menzerna PO87mc it would give the glass some additional gloss while removing or at least lessening the appearance of any defects. Is this a good idea? I would obviously use a reasonable amount of pressure and not dwell in one spot for too long...
The other option is can I use the glass polish I got in my Lake Country glass polishing kit with my normal ccs pads? I dont really like those "felt" like pads I got with it; very hard to control and dont follow the contours in the glass.
Thanks in advance everyone!
My thoughts were if I used a ccs white pad with Menzerna PO87mc it would give the glass some additional gloss while removing or at least lessening the appearance of any defects. Is this a good idea? I would obviously use a reasonable amount of pressure and not dwell in one spot for too long...
The other option is can I use the glass polish I got in my Lake Country glass polishing kit with my normal ccs pads? I dont really like those "felt" like pads I got with it; very hard to control and dont follow the contours in the glass.
Thanks in advance everyone!