Astin Martin DB9 Help

[HMFIC]

So I was discussing WG Paint Sealant 3.0 with on of my regular customers today.
I talked about how I read about putting 6 coats of WG PS and topping it with some Fuzion. I told him I would look into it more and get back to him.

Now I have never used a paint sealant, but i have read that you can put 6 coats or more 12hrs apart as long as it stays moisture free. His garage is climate controlled so this is no a problem.

My plan is to use P21S GEPC to strip old wax and possible clay bar after if needed. Then use WG PS everyday for 6 days and on the 7th put on the Fuzion.

What should something like that cost on a car of that value?
Any other info would be appreciated



Thanks,

Gordon

[jking]

You will have the time of putting it on and letting it set up, if you have to drive very far and also the cost of the products. I would charge at least $30 an hour. Just my thinking.

[loudog2]

6 coats is a litlle overkill IMO. 2 coats and top with fuzion would be fine. If you use too much product over paint, the paint gets distorted , and looks terrible.

[Surfer]

6 coats is kinda pointless. 2 coats is best and then top with wax.

[HMFIC]

6 coats is kinda pointless. 2 coats is best and then top with wax.

Was wondering about that. Thanks for the help