M105 & M205

[DiPaoro]

I am strongly learning towards buying M105 and M205. Also, I am considering CCS 4 inch pads to compliment the PC better. The question is orange and white colors (4 inch) are in mind for these products. However, I am thinking about passing on the white and getting green.

What do you guys think?

[loudog2]

It doesn't hurt to try new stuff. Get 2-3 of each pad(all colors). You will eventually need it. I use my 4 inch for all tight spots and bumpers.

[ASPHALT ROCKET]

As louie said get atleast 3 pads of each color. M105 is a great compound. M205 is an o.k. finishing polish just doesn't have the gloss off 85rd, 106fa, scholls, or Ultrafina. It also isn't a bad polish to clean up some minor defects and then finish up with another polish to bring the gloss to where it needs to be.

[dublifecrisis]

I betcha 205 and a green pad would make a good 1 step polish and remove some decent swirls on certain paints and finish down decently enough. I've never used the green pads but I have used 205 with white and gone right to LSP afterwards. It actually had a decent cut for a "finishing polish".

[termigator]

I betcha 205 and a green pad would make a good 1 step polish and remove some decent swirls on certain paints and finish down decently enough. I've never used the green pads but I have used 205 with white and gone right to LSP afterwards. It actually had a decent cut for a "finishing polish".

Which green pad are you talking about? The "coarse" once slotted between the orange & white or the one between white and gray?

[loudog2]

Which green pad are you talking about? The "coarse" once slotted between the orange & white or the one between white and gray?
between white and gray.

[termigator]

between white and gray.

I've been thinking about trying the finer green one with FP II to see what will happen. I've always used FP II with the white pad.